1.
Effect of ferritic region hot-rolling on deep draw ability of Ti-IF steel
铁素体区热轧工艺对Ti-IF钢深冲性能的影响
2.
Effect of Annealing Technology on Deep-drawing Property of DDQ Cold Sheets Rolled with CSP Hot Strips
退火工艺对CSP基板DDQ冷轧板深冲性能的影响
3.
THE EFFECT OF CROSS ROLLING AND ANNEALING ON THE DEEP DRAWABILITY OF Mo-Re ALLOYS FOIL
交叉轧制及退火对钼铼合金箔材深冲性能的影响
4.
Structure and Performance of the Drawn Ni-coating Steel Strip Surface and Interface Section;
覆镍深冲钢带表界面结构和相关性能
5.
Research on Annealing Technology and Microstructure and Property of Drawable Cold Sheets
冷轧深冲板退火工艺和组织性能研究
6.
Study on Recrystallization Dynamic and Microstructure-Properties for DDQ(Deep Drawable Quality) Cold Rolled Sheets;
冷轧DDQ级深冲板再结晶动力学和组织性能研究
7.
Effect of Annealing Process on Microstructure and Mechanical Properties of Deep Drawing Cold Rolled Strip
退火工艺对深冲用冷轧带钢组织性能的影响
8.
Mechanical Property Prodiction of Hot Rolled Deep-Drawing Steel in CSP with Netural Networks;
基于人工神经网络的CSP热轧深冲板力学性能预报
9.
Study on Effects of Metallurgical Processing on Microstructure and Properties of Ferritic Hot-Rolled Deep-Drawing Interstitial-Free (IF) Sheet Steel
冶金因素对热轧深冲无间隙原子（IF）钢板组织性能影响的研究
10.
Study of the Influence of Annealing and Temper-rolling Process on the Mechanical Properties of Deep-Drawing Quality Galvanised sheet
退火与平整工艺对热镀锌深冲钢力学性能的影响研究
11.
Influences of Temperature System on Cold Rolled Deep-Drawing Sheet Produced by CSP Process
退火温度制度对CSP流程冷轧深冲板性能和织构的影响
12.
Influence of CSP Coiling Temperature and Cold Rolling Reduction Ratio on Microstructures and Mechanical Properties of Deep-Drawing Steel Sheets
卷取温度和冷轧压下率对CSP流程深冲板组织性能的影响
13.
building up properties
提升性(染深性能)
14.
Love is c a conflict between reflexes and reflections.
爱是本能反应与深思熟虑之间的冲突。
15.
MICROSTRUCTURE AND FORMABILITY OF LOW CARBON PHOSPHORUS-ADD DEEP DRAWING STEEL SHEET
含磷低碳深冲钢的微观结构与成型性
16.
The heat conductivity of bentonite is one of the important parameters for buffer/backfilling materials as barriers in high level radioactive waste disposal system.
膨润土的热学性能是评价膨润土作为高放废物深地质处置库缓冲／回填材料的重要参数。
17.
Erosion Properties and Mechanisms of B_4C/TiB_2/Al_2O_3 Series Nozzles
B_4C/TiB_2/Al_2O_3喷嘴冲蚀性能及其冲蚀机理
18.
Erosion Properties and Mechanisms of B_4C/TiB_2/Mo Series Nozzles
B_4C/TiB_2/Mo喷嘴冲蚀性能及其冲蚀机理