1.
This resulted in a rough and bead-shaped surface, obstructing a smooth layer deposition.
球化的出现妨碍了直接金属激光烧结成形的顺利进行。
2.
A series of experiments were carried out with direct metal laser sintering (DMLS) for the 316 stainless steel powders.
采用直接金属激光烧结的方法，对316不锈钢粉末进行了一系列烧结实验。
3.
Numerical Simulation and Sintering Zone Prediction of Direct Laser Sintering of Multi-component Metal Powders
多组元金属粉末直接激光烧结过程数值模拟及烧结区域预测
4.
Study on Direct Selective Laser Sintering of Ni-Based Metallic Powder and Key Technologies;
Ni基金属粉末激光直接烧结成形及关键技术研究
5.
3D Finite Element Simulation of the Temperature Field and Experiment Study on Direct Metal Laser Sintering;
金属粉末激光直接烧结温度场的三维有限元模拟及实验研究
6.
Investigation into Manufacturing Metal Parts via Indirect Selective Laser Sintering;
选择性激光烧结间接制造金属零件研究
7.
Research on Direct Laser Metal Sintering of Nickel-based Metal Powder Material;
直接激光烧结镍基高温合金的工艺研究
8.
Experimental Investigation on Direct Metal Laser Sintering of Nickel-based Metal Powder Material
镍基高温合金粉末直接激光烧结实验研究
9.
Investigation into Manufacturing Parts by Metallic Composite Powders via Indirect Selective Laser Sintering;
金属复合粉末选择性激光烧结间接制造零件研究
10.
Development Status for Selective Laser Sintering of metal powder
金属粉末选区激光烧结技术研究现状
11.
Study on CO_2 laser sintering for the mixture of metallic powder and diamond grits
金刚石颗粒-金属粉末的CO_2激光烧结机理研究
12.
Finite Element Simulation of Warp Distortion in Direct Metal Laser Multi-layers and Multi-tracks Sintering;
多层多道金属粉末激光烧结体翘曲变形模拟
13.
Study on New Metal Powder Materials by Selective Laser Sintering;
新型选择性激光烧结金属粉末材料的研究
14.
Enhancement of mechanical performance of porous metallic parts by resin infiltration and selective laser sintering
树脂增强选择性激光烧结多孔金属件的研究
15.
Study on Fabrication of Alloy Parts of Molybdenum Powders by Selective Laser Sintering
选择性激光烧结Mo/Cu金属件制备工艺研究
16.
Microstructure and Mechanal Property of Samples Prepared by DLMS with FGH95 Powder
FGH95粉末激光直接烧结的微观组织及力学性能
17.
Research on Mechanism and Process of Laser Direct Rapid Forming Metallic Components;
激光直接快速成形金属零件的机理及工艺研究
18.
Direct Laser Fabrication of 3-Dimentional Metal Parts Based on Laser Cladding;
基于激光熔覆的三维金属零件激光直接制造技术研究