1.
The selectivitys for grain size of crystal in process of annealed treatment for the amorphous;
非晶退火晶化过程中晶粒度的可选择性
2.
The relationship be-tween grain size and fractal dimension is investigated.
考察了晶粒度与分维之间的关系。
3.
Relationship of Cooling Rate and Grain Sizes in ZL205A Alloy;
ZL205A合金冷却速率与晶粒度的关系
4.
Connection of Grain Size in Welding Heat Affected Zone and Welding Process of SUPER304H Steel
SUPER304H焊接工艺与热影响区晶粒度的关系
5.
Grinding performances on cemented carbides containing different sizes of grain
不同晶粒度硬质合金的磨削性能研究
6.
Study on Controlling Austenitic Grain Size and Carbide in SNCrW Steel
SNCrW钢晶粒度及碳化物的控制研究
7.
Influence of hot-forge processing parameter on FGH4096 alloy grain size
热模锻工艺对FGH4096合金晶粒度的影响
8.
Fine grain grade with high hardness and high toughness.
具有高硬度和高韧性，晶粒度为细级别的牌号。
9.
Normalization procedure was added before the transverse rolling for improving steel austenite grain fineness and removing mischcrystal structure.
在横轧前增加正火工序,改善钢的奥氏体晶粒度,消除混晶组织。
10.
Computation Model and Confirmation of Magnesium Alloy AZ91D Inverted Extrusion Dynamic Recrystallization Size
镁合金AZ91D反挤压动态再结晶晶粒度计算模型与验证
11.
Crystal Particle Grade Measurement Through Computer Image Process
计算机图像处理技术在晶粒度测量中的应用
12.
The mechanical property and grain size shall conform to the requirement in table 4.
机械性能和晶粒度应满足以下表4中的要求。
13.
Cold rolled low-carbon steel sheet--Ferrite grain size--Test methods
GB/T4335-1984低碳钢冷轧薄板铁素体晶粒度测定法
14.
So the grain size of the gear steed must be maitained above No 6 grade.
因此,必须严格控制其晶粒度,使之为6级以上。
15.
The Effect of Crystal Size on Selective Catalytic Reduction of NO_x by Acetylene over Zeolites;
沸石的晶粒度对乙炔选择催化还原NO_x的影响
16.
With the features of ultrafine grain, fair matching of high strength and high toughness in the ultrafine grain steel.
论述了超细晶粒钢的超细晶粒及高强度与高韧性良好匹配的特点。
17.
The Temperature Field Simulation of Fine Grain TC4 Titanium Alloy and Studying of Grain Growth;
细晶粒TC4钛合金焊接温度场模拟及晶粒长大规律研究
18.
Effect of Deformation Temperature on Grain Refinement of Pipeline Steel X52
变形温度对X52管线钢晶粒细化的影响