1.
Experimental Research on NC Bending with Small Bending Radius of Aluminum Alloy Thin-Walled Tube;
铝合金薄壁管小弯曲半径数控弯曲成形的实验研究
2.
Numerical Analysis of Wall-thickness Thinning during the NC Tube Bending Process;
薄壁管数控弯曲成形壁厚变薄的数值分析
3.
Research on Wrinkling and Forming Limit of NC Bending Process of Thin-Walled Tube;
薄壁管数控弯曲成形过程失稳起皱及成形极限的研究
4.
Numerical Simulation of Wrinkling Onset during the NC Bending Process of Thin-walled Tube;
薄壁管数控弯曲成形过程失稳起皱的数值模拟研究
5.
Research on Optimization in Precision NC Bending Process of Thin-Walled Tube;
薄壁管数控弯曲精确成形过程参数优化研究
6.
Real-Time Identification of Matirial Parameters during Intellectural Control of Bending;
弯曲成形智能化控制中材料参数的实时识别
7.
Simulation and Experiments of Laser Bending of Silicon Sheet;
硅片激光弯曲成形的数值模拟及试验
8.
Numerical Simulation of Laser Bending 1Cr17Ni2 Stainless Steel;
1Cr17Ni2不锈钢板料激光弯曲成形数值模拟
9.
Forming a curved configuration.
成曲线形的，弯曲的
10.
form a curl, curve, or kink.
形成卷曲、弯曲或纽结。
11.
FEM Simulation of Bending Deformation and Research on Quality Controlling for Truck Lengthwise Beam;
车架纵梁弯曲成形模拟分析及质量控制的研究
12.
Analyse and Simulation on Bend Forming under the Modle of Forcedisplacement-Controlled MPF
力—位移分控模式多点弯曲成形分析与模拟
13.
Bend a piece of iron into a horseshoe.
把一块铁弯曲成马蹄形
14.
Research & Development on the Numeric Simulation of the Tube Bending;
管材弯曲成形数值模拟技术的研究与开发
15.
Research on Apparatus Parameters of Strip Metal In-Plane Bending under Unequal Compression;
板带不均匀压下面内弯曲成形装置参数的研究
16.
Numerical simulation on the spring back of sheet metal after multi-step bending
板料多次弯曲成形回弹的数值模拟研究
17.
FEM analysis of hot bending process for 17 type of coupler yokes
17型锻造钩尾框热弯曲成形过程数值模拟
18.
To make or form an offset in(a wall, bar, or pipe).
做弯曲使在（墙、杆或管子）上形成壁阶或弯曲