1.
Research on Mechanism and Process of Laser Direct Rapid Forming Metallic Components;
激光直接快速成形金属零件的机理及工艺研究
2.
The Research on 3D-CAD Models Direct Slicing Technique in Laser Rapid Prototyping;
激光快速成形中三维CAD模型直接切片处理技术的研究
3.
Research on the Precision of Laser Direct Manufacture Superalloy;
激光直接成形高温合金成形精度研究
4.
Research on Mechanical Behavior of Laser Rapid Forming Metal Part;
激光快速成形金属零件力学行为研究
5.
The Powder Feeding System for Laser Powder Rapid Micao-Fabrication;
激光粉末快速微成形送粉系统的研究
6.
fast-response laser receiver
快速响应激光接收器
7.
Study on the Technology of Inside-Laser Coaxial Powder Feeding Cladding and Rapid Prototyping Process of Laser;
基于光内送粉的激光熔覆快速成形技术研究
8.
Study on Inside-laser Powder Feeding of Laser Cladding Rapid Prototyping
激光熔覆快速成形光内送粉方式的研究
9.
The Laser Rapid Forming Technology with Low Cost Hydrogenation Dehydrogenization Titanium Alloy Powders;
低成本氢化脱氢钛合金粉末的激光快速成形
10.
Research on Microstructures and Mechanical Properties of Laser Rapid Forming TC21 Titanium Alloy;
激光快速成形TC21钛合金的组织和力学性能研究
11.
Study on Ni-based Alloy Powders for the Laser Cladding and the Rapid Forming;
激光熔覆及快速成形专用镍基粉末的研制
12.
Study of Part Rapid Prototype and Powder System of Laser Cladding Rapid Manufacturing;
激光熔覆实体快速成形及送粉系统研究
13.
Research of High Power Laser Cladding Rapid Prototyping Technology;
大功率激光熔覆快速成形工艺实验研究
14.
Research on Microstructures and Properties of Ti-6Al-4V Titanium Alloy in Laser Rapid Forming Processing;
激光快速成形TC4钛合金的组织和力学性能研究
15.
Study on the Mechanical Properties of Laser Rapid Forming of Rene'88DT Superalloy;
激光快速成形Rene'88DT高温合金力学性能研究
16.
The Study of Monitoring and Controlling Dimensions of Deposition Layers in the Laser Rapid Forming Process;
激光快速成形沉积层几何参数监测与控制研究
17.
Temperature Measurement and Research on Microstructure Controlling in Laser Rapid Forming Process;
激光快速成形过程温度测量及组织控制研究
18.
Study on Fe-based Alloy Powders for the Laser Cladding and the Rapid Forming;
激光熔覆及快速成形专用铁基粉末的研制