1.
Types of heat-resisting superalloys
GB/T14992-1994高温合金牌号
2.
Research on High Temperature Fatigue Life Models of Powder Metallurgy;
粉末高温合金高温疲劳寿命模型研究
3.
The Research on Mechanism of GH4133B Superalloy after Fatigue at Elevated Temperature;
镍基高温合金GH4133B的高温疲劳行为研究
4.
High- temperature Alloys High-temperature-sensitive Mechanism of Crack
高温合金高温裂纹敏感性机理的研究
5.
Transverse Stress-rupture Properties of Single Crystal Superalloy DD6 at Mediate Temperature
单晶高温合金DD6的中温横向持久性能
6.
Wear Mechanism of Cemented Carbide Tool in High Speed Machining Iron-based Superalloy GH2132
高速车削铁基高温合金硬质合金刀具磨损机理
7.
Creep Rupture Behavior of a Cast Ni-base Superalloy at High Temperature
一种铸造镍基高温合金的高温蠕变断裂行为
8.
High Temperature Mechanical Behavior of a Cast Nickel-base Superalloy with Low Cost
一种低成本镍基铸造高温合金的高温力学行为
9.
Study on the High Temperature Oxidation Behaviors of NiCrAlCo Superalloy Sheet Prepared by EB-PVD;
EB-PVD制备NiCrAlCo高温合金薄板高温氧化行为研究
10.
Low Cycle Fatigue Fracture Mechanism at Elevated Temperature for FGH96 Nickel-base Superalloy
FGH96镍基高温合金的高温低周疲劳断裂机理研究
11.
Microstructure of high Cr content cast Ni-base superalloy K4648
高Cr铸造Ni基高温合金K4648的显微组织
12.
RULE OF SEGREGATION OF ALLOYING ELEMENTS IN CAST Ni-BASE SUPERALLOYS
镍基铸造高温合金中合金元素的偏析规律
13.
Experimental Study on the Green Cutting Technology of High Temperature Alloy and Titanium Alloy;
钛合金与高温合金的绿色切削技术试验研究
14.
Study on the Microstructure of Nickel-based Superalloy and Titanium Alloy Surface Coating;
镍基高温合金和钛合金表面涂层微观组织分析
15.
Effects of Pouring Temperature on the Solidification Microstructure of Single Crystal Superalloy DD6
浇注温度对DD6单晶高温合金凝固组织的影响
16.
Influence of Shear Temperature on Chip Formation of Turning GH4169
剪切温度对车削加工GH4169镍基高温合金的影响
17.
Isothermal oxidation behavior of Ni-Cr-based superalloy containing MoS_2 at 800℃
含MoS_2镍基高温合金在800℃的恒温氧化行为
18.
Isothermal Low-cycle Fatigue and Thermomechanical Fatigue Behavior of MCrAlY Coated and Uncoated Nickel Base Superalloy;
MCrAlY涂覆的镍基高温合金及其基体合金的等温和热机械疲劳行为