1.
The Structure and Principle of Two-way Cartridge Valve with its Application in Hydraulic Machine
二通插装阀的结构、原理及其在液压机上的应用
2.
The influence of parameters of two-way cartridge valves on mine hoist emergency brake
二通插装阀参数对提升机安全制动过程的影响
3.
Logic valves comprise cartridge elements and covers with pilot passages.
插装阀是由插装元件（件）带先导通路的阀盖组成的。
4.
Using Three-way Return of Cartridge Valve in Hydraulic System of 25T External-Pilot Casting Machine
插装阀三通回路在25T外导式铸造机液压系统中的设计应用
5.
Simulation Research on the Dynamicproperty of On-Off Cartridge Valve and the Pressuer Descending Property of Unloading Cartridge Valve
插装阀动特性与液压机预卸荷插装阀组卸压特性仿真研究
6.
A tow classes-pilot cartridge valve and its application reseach in high-speed hydrualic stamping
插装阀及其在电液控制油路中的应用
7.
Iron globe valves most commonly use semi-plug bronze disc/seat design.
铸铁截止阀通常采用半插入式青铜阀瓣/阀座结构。
8.
Application of proportional cartridge valve in forging-press machine
比例插装阀在锻造液压机中的应用分析
9.
Design of a Seawater Hydraulic Solenoid Cartridge Directional Valve
大流量插装式海水液压电磁换向阀的设计
10.
Design of the Hydraulic System for Tube Necking-in Machines and Application of Cartridge Valves
管端收口机液压系统设计及插装阀应用
11.
Research on screw-in cartridge valves using piezoelectric actuator
压电执行器在螺纹插装阀中的应用研究
12.
Modeling and validation of high speed and large flow cartridge proportional throttle valve
高速大流量插装式比例节流阀的建模与验证
13.
Before installation, check line of flow through valve so that valve will function properly.
安装前，切断通过阀门的流体，以使阀门工作正常。
14.
Remove stem nuts (22). Keep stem from turning by inserting screw driver in slot on end of stem.
拆卸阀杆螺母(22)。通过在阀杆末端的槽内插入螺丝刀来避免阀杆旋转。
15.
3-D Visual Numerical Simulation of the Flow Field in Hydraulic Cartridge Potpper Valve;
插装型液压控制锥阀流场的三维可视化数值模拟与仿真研究
16.
Bond graph based non-linear modeling of high frequency response cartridge valves
利用键合图的高频响插装阀非线性建模方法研究
17.
"Before installation, check line of flow through valve so that valve will function properly. Close valve completely before installation."
安装前,切断通过阀门的流体,以使阀门工作正常。安装前要完全关闭阀门。
18.
These valves have better flow than lift checks and most often use a wafer body for low cost and easy installation.
这种阀流通性能比升降式止回阀要好,通常采用平板阀体,这样成本更低,安装也更加容易。