1.
Research on the Solid-Liquid Mixed Casting;
固液混合铸造Al-10Cr合金的研究
2.
Study on Al-Mn Alloy Prepared by the Mixed Solid-liquid Casting;
Al-Mn合金的固液混合铸造研究
3.
Microstructure and Mechanical Properties of ZA12 Alloy Prepared by Mixed Solid-liquid Casting;
固液混合铸造ZA12合金组织与性能研究
4.
Research on Aluminum Alloy and High Chromium Cast Iron Prepared by Solid-Liquid Mixed Casting Process
固液混合铸造铝合金和高铬铸铁的研究
5.
Research on the Microstructures and Mechanical Properties of the Al-Cu Alloys Fabricated by the Solid-Liquid Mixed Casting Technology;
固液混合铸造Al-Cu合金组织和力学性能的研究
6.
The Research on the Microstructures and Mechanical Properties of ZA60 Alloys by Solid-Liquid Mixed Casting;
固液混合铸造ZA60合金显微组织及其性能的研究
7.
Study on Tensile Strength and Impact Property of High Chromium Cast Iron Prepared by Solid-liquid Mixed Casting Process
固液混合铸造高铬铸铁的拉伸性能和冲击性能的研究
8.
Solid-liquid Mixed Die-casting of Al-10%Cr Alloy
Al-10%Cr合金的固液混合压铸工艺
9.
Evolution of the Semi-Solid Microstructures of 7075 Aluminum Alloy Cast by LSC
液相线半连续铸造7075铝合金半固态组织演变
10.
Study on Simulation of Structures of Semi-solid Metal Slurry Made by Liquidus Casting Using Phase-field Method;
半固态合金液相线铸造组织相场模拟研究
11.
Effect of Pouring Disturbance on Preparation of Semi-Solid AlSi9Mg Alloy by Near Liquidus Casting
浇注扰动对近液相线铸造半固态AlSi9Mg合金的影响
12.
KK/ Combi-pack solid/liquid
固-液混合包装桶混剂
13.
mixed liquid suspended solid
混合液内含的悬浮固体
14.
phase mixtures of solid and liquid
固相与液相的混合物
15.
Solidified Structure Simulation of the Titanium Castings Made by Vertical Centrifugal Casting
钛合金铸件立式离心铸造凝固组织数值模拟
16.
Solidification Behavior and As-cast Microstructure of Permanent Mould Casting Mg-10Zn-2Al alloy
金属型铸造Mg-10Zn-2Al合金的凝固行为及铸态组织
17.
Numerical Simulation of AZ91 Cast Magnesium Alloy's Solidification Process
AZ91铸造镁合金凝固过程数值模拟
18.
Bonded Film's Morphology and Composition of Foundry Mixed Used Sand
铸造混合旧砂粘结剂膜的形貌及组成