1.
Research on Microstructure and Heat-treatment of (Ti, V)C/Fe Composites Synthesized by in Situ Sintering;
原位烧结合成（Ti，V）C/Fe复合材料的微观结构与热处理研究
2.
Effect of Heat Treatment on Microstructure and Wear Resistance of(Ti,V)C Steel Bonded Carbide Produced by In-situ Sintering
热处理对原位烧结(Ti,V)C钢结硬质合金组织及耐磨性的影响
3.
In-Situ Synthesis of WC-Co Composite Powder and Sintering Preparation of Bulk Cemented Carbides
WC-Co复合粉的原位合成与块体硬质合金的烧结
4.
Preparation of In-situ Reinforced Porous Nickel-based Composites by Laser Sintering
激光烧结法制备原位增强型多孔镍基复合材料
5.
In-situ reaction hot-pressing sintering process of SiC/MoSi_2 composites
SiC/MoSi_2复合材料的原位反应热压烧结工艺
6.
Effect of WC content on sintering process and structure properties for in situ sintering synthesis of Mo_2FeB_2
WC对原位合成Mo_2FeB_2烧结及组织性能的影响
7.
In-situ Reactive Sintered Si_3N_4 Multiphase Ceramics and Its Environmental Performance;
原位反应烧结制备氮化硅基复相陶瓷及其环境性能
8.
In-Situ Fabrication of TiC/Ti_2AlC Composite by Spark Plasma Sintering-Reactive Sintering (SPS-RS) Method and Its Mechanical Property
放电等离子烧结原位制备TiC/Ti_2AlC复合材料及室温力学性能评价
9.
Research on Mechanical Properties of SiC/MoSi_2 Composites Prepared by Technology of In-situ Reaction Hot-pressing Sintering
原位反应热压烧结SiC/MoSi_2复合材料的力学性能研究
10.
Preparation and Characterization of SiC-MoSi_2 Composite Materials by In-situ Pressureless Reaction Sintering
原位无压反应烧结制备SiC-MoSi_2复合材料及其性能研究
11.
Effect of Sintering Process on Conductivity and Mechanical Properties of In-situ Formed Mo_2C/Cu-based Composite
烧结工艺对原位生成Mo_2C/Cu基复合材料力学与导电性能的影响
12.
In-situ synthesis of periclase-hercynite material:sintering process and properties
原位合成方镁石-铁铝尖晶石材料的烧结工艺及性能研究
13.
Nanostructured Bulk Polycrystal LaB_6 Cathode Prepared by in-Situ Spark Plasma Sintering
放电等离子烧结原位制备LaB_6多晶纳米块体阴极材料
14.
Research of mechanism on sintered bricks made from high volume fly ash;
粉煤灰烧结砖原料处理与烧结反应机理的研究
15.
Application of Normalization for In-situ Multi-element Raster Analysis in Laser Ablation-Inductively Coupled Plasma Mass Spectrometry Illustrated with Garnets
激光烧蚀-等离子体质谱结合归一定量方法原位线扫描检测石榴石多种元素
16.
Study the Influence Raw Composition and Sinter Craft Parameter on Sinter Phase Structure and Strengh;
原料组成和烧结工艺参数对烧结矿相结构及强度的影响研究
17.
Research on the Process of Selective Laser Sintering Rapid Prototyping;
激光选区烧结快速原型技术工艺研究
18.
Study on Improving Reduction Disintegration Index of the Low-temperature Sinter
改善烧结矿低温还原粉化指数的研究