1.
the tensile strength is 29kN/m; the extensibility of the joint and the abrasive belt is reaching unanimity,which is 4.5%;
接头延伸率与涂附磨具本身趋于一致 ,延伸率为 4 5 %。
2.
Study on the Elongation of W-Ni-Fe Heavy Tungsten Alloys;
W-Ni-Fe高密度合金的延伸率研究
3.
REASON ANALYSIS ON INCOMPETENT ELONGATION OF LOW-ALLOY MEDIUM PLATE
低合金中厚板延伸率不合的原因分析
4.
Technology for Controlling Elongation on 1 500 mm Cold Rolled Skin Pass Mill in Angang
鞍钢1500mm冷轧平整机组延伸率控制技术
5.
Elongation automation system of double stands skin miller
双机架平整机延伸率自动化控制系统
6.
Elongation Control Technique of Temper Mill for 1500mm Cold Rolling
1500mm冷轧平整机的延伸率控制技术
7.
Study on Improving the Elongation of SPCC Cold Rolled Plate
提高SPCC冷轧板断后延伸率的研究
8.
Both flange and web exhibited satisfactory elongation characteristics (i.e. 28%).
翼缘和腹板都有令人满意的延伸率（即28％）。
9.
Elongation control technique for baosteel 1550mm CAL temper mill
宝钢1550连续退火机组平整机延伸率控制技术
10.
Elongation Stability Control of Strip by Skin-pass Mill in CAL
冷轧连续退火带钢平整延伸率稳定性控制
11.
Tension and Elongation Control of 1450mm Tension Formation Leveler System
1450mm平整拉矫机组系统张力及延伸率控制
12.
Features: High strength， high modulus， low extensibility， good anti-fatigue and anti-tearing performance． resistant to high-temp erature track， delaying and decreasing crack reflection.
特点：高强度、模量，低延伸率、疲劳开裂，耐高温车辙，延缓减少反射裂缝。
13.
The precipitation of minorα phase which has little effect on its shape memory effect can enhance its elongation.
少量α相的析出不影响记忆效应,可使延伸率得以提高。
14.
The output parameters of the model are three mechanical properties namely ultimate tensile strength (UTS), yield strength (YS) and elongation (ELO).
模型的输出为三个力学性能指标,即抗拉强度、屈服强度和延伸率。
15.
The change of breaking strength and elongation of the fabrics before and after metallization was evaluated by strip method according to GB/T 3923.1-1997.
采用条样法测定织物镀金属前后的断裂强力和断裂延伸率。
16.
Innovational Design and Emulation Study in Composite Control of Elongation and Shape of Strip for 2H Temper Rolling Mill;
延伸率和板形综合控制二辊式平整机改造设计和仿真研究
17.
Auto-set Technology of Elongation and Tension about Hot-galvanizing Skin Mill
热镀锌平整机延伸率与张力自动控制技术的研究
18.
Study on Elongation of Zein Films with Compound Plasticizer by Response Surface Methodology
响应面法优化复合塑化剂玉米醇溶蛋白膜延伸率的研究