1.
Research on Technical Parameters and Cuttingtool Path of NC Machining Process;
数控切削加工工艺参数及刀具运动轨迹的研究
2.
The Tool Path Generation Software System for 2Dimensions Numerical Control;
二维数控刀具轨迹自动生成软件系统
3.
Dynamic Simulation of NC Interpolation Route of Machine Tool Based on VB
经济型数控机床刀具轨迹控制动态仿真的实现
4.
The key technical research in interference-free tool path of torus cutter
圆角刀无干涉刀具轨迹关键技术研究
5.
The Brownian movement of pollens also shows the fractal characteristics.
花粉的布朗运动轨迹也具有分形特征。
6.
Abstract: When a NC milling toolpath is generated, in order to reduce machi ning errors and manufacuring cost, the optimization of NC toolpath have to b e paid attention to.
文摘:在生成NC铣加工刀具的运动轨迹时，应注意优化加工路径，以减少加工误差、少加工成本。
7.
When a NC milling toolpath is generated, in order to reduce machi ning errors and manufacuring cost, the optimization of NC toolpath have to b e paid attention to.
在生成NC铣加工刀具的运动轨迹时，应注意优化加工路径，以减少加工误差、少加工成本。
8.
Tool Path Calculation of NC Machining Based on Actual Profile of Cutter
基于刀具实际廓形的数控加工刀具轨迹计算
9.
Common Method for Calculating Both the Borderline of the Plate Cam with a Roller-swinging-follower and the Cutter Central Path
摆动滚子从动件盘形凸轮廓线和刀具中心轨迹的通用算法
10.
CAD Animation Method for Designing Profile Curve and Cutter Center Track of Disk-cam with Straight Moving Follower;
直动从动件盘形凸轮廓线和刀具加工轨迹的CAD求解
11.
Contouring NC systems can direct the tool or workpiece to move at any angle, and also along curved paths.
轮廓数控系统能将刀具或工件向任一角度,也可沿曲线轨迹移动。
12.
The Automatic Generation Rescerch of Tool Paths for Surfaces Machinning Based on Space-Filling Curves;
基于填充曲线的曲面数控刀具轨迹自动生成算法研究
13.
Research on Tool Path Dynamical Analysis and Optimize Method for the Multi-axis Machining;
叶片多轴加工中的刀具轨迹动力学分析与补偿方法研究
14.
Offset Algorithm Based Tool-path Planning for NC Machining;
基于等距法的数控加工刀具轨迹规划
15.
Pocket tool path optimization in high speed milling;
型腔高速铣削加工刀具轨迹优化研究
16.
Tool Path Planning for High Speed Milling of Free-form Surface with Toroidal Cutter
环形刀具高速铣削自由曲面轨迹规划
17.
Smoothness-optimal trajectory planning method with constraint on traveling time for manipulators
具有运动时间约束的机械手最优平滑轨迹规划
18.
Research on Tool Path of the Glass Bulb Panels Surface of Ball-end Milling Cutting Tool;
球头刀铣削屏凸模表面运动轨迹优选的实验研究