1) translucent injection molded parts
半透明注塑制品
1.
The software moldflow was used to simulate the place of weld line taking place in translucent injection molded parts and optimize the location of the gates and process parameters.
借助模流分析软件Moldflow对半透明注塑制品熔接痕位置进行模拟分析,以此来优化浇口的位置和成型工艺参数,最终使熔接痕位于半透明注塑制品不重要的部位,并提高了熔接痕的强度。
2) transparent injection molded parts
透明塑料制品
1.
Birefringence phenomena of transparent injection molded parts is usually used to measure the residual stress by photoelastic experiment which is simple and need not destroy parts.
本文在透明塑料制品光弹测试的基础上，仔细研究了相关光弹测试结果，发现了其条纹不仅疏密不同，开口、闭合可能同时存在，且存在干扰噪声。
3) transparent injection product
透明注塑件
1.
During the design of injection mould for transparent injection products required high appearance, the structure design and size counting of pouring system, as well as the structure design of extrasion parts and mould were studied.
通过对电风扇灯罩注塑摸具的设计探讨,解决了一模一腔注塑模设计中常遇到的锁模力与胀模力偏心问题,并对外观质量要求高的透明注塑件的注塑模具设计中浇注系统的结构设计、尺寸计算,推出机构的结构设计和模具总体结构设计进行了探讨,找到了解决问题的方法。
4) injection molding products
注塑制品
1.
The impacting factors for repeating weight precision of injection molding products such as plasticating displacement , backpressure, screw speed, heating temperature, screw property, injection pressure, injection rate, injection efficiency, property of control system of mold temperature are analyzed in theory and practice.
对影响注塑制品件重重复精度的塑化位移、背压、螺杆转速、加热温度、螺杆性能、注塑压力、注射速率、注射效率、模具温控性能等主要因素,从理论和实践上作了比较具体的分析,提出了提高注塑制品件重重复精度的具体措施。
5) injection molded part
注塑制品
1.
A neural network approach to material selection for injection molded parts;
基于神经网络的注塑制品材料选择方法
6) injection product
注塑制品
1.
The influences of locking force, mould, residual stress and internal stress on the white-line round injection products are discussed and the methods of improving white-line .
针对注塑制品在成型过程中常见的周边白线缺陷分析了其产生的原因,发现主要是由于聚合物在拉应力作用下应力集中而产生空化条纹状形变区,这些条纹平面区强烈地反射可见光,使材料表面形成一片银白色光泽。
2.
The factors affecting the common apparent defects of injection products are fully analyzed on the aspects of material,design of the mould,design of the product and forming techniques.
但注塑制品在成型过程中常会出现各种缺陷,从影响注塑制品质量的几个因素(材料、成型工艺、模具设计、制品设计)着手,分析了注塑制品常见的表观缺陷、产生的原因及其对策。
补充资料：各种增强改性塑料、塑料合金及制品
各种增强改性塑料、塑料合金及制品
督 一年种咐恤改日别州、喇料台金咬制品确厅脚爵‘卜厂曰佑
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条