1) injection pressure difference
注入压差
2) Injection misalignments
注入误差
1.
Injection misalignments induced consuming fluctuation of optical power density,a high-peak power density appeared at the initial "entry" segment of the fiber path,that is s.
注入误差引起光纤初始输入段激光峰值功率密度的剧烈波动,出现了一个激光峰值功率密度极大值,这个极大值是可以达到光纤截面内激光平均功率密度的数十倍;横向偏移激发大量斜光线产生,使光纤输出激光能量分布匀化;角度偏移仅影响光纤内子午光线与斜光线的传播方向,对光纤内激光能量分布的匀化作用较弱。
3) pressure difference between production and injection
注采压差
4) injection pressure
注入压力
1.
Effect of decreasing injection pressure of high-concentration polymer solutions;
高质量浓度聚合物溶液注入压力的降压效果
2.
Raise in injection pressures and,in some cases, troubles with injectivity appear in lots of polymer injection wells in polymer flooding reservoirs in Daqing and are explained by blockage creation caused by adsorption/retention and precipitation of polymer molecules and existance of adosrbed oil film in formation pores.
5μm2),在连续注入800 mg/L的聚合物时,注入压力上升较慢且稳定值较低(0。
5) injection/pressure drop
注入/压降
6) filling pressure drop
注入压降
1.
The key parameters on coalbed gas storage are available by filling pressure drop.
注入压降试井可以获取煤层气储层的重要参数，压力计的正确使用和设置对试井成功至关重要。
补充资料：注入
1.灌入。多指抽象事物。 2.记入，记下。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条