1) star-shaped solution polymerized styrene-butadiene rubber
星形溶聚丁苯橡胶
1.
Structure and properties of star-shaped solution polymerized styrene-butadiene rubber/silica co-coagulating rubber filled with nano-silica
纳米二氧化硅填充星形溶聚丁苯橡胶/二氧化硅共凝聚胶的结构与性能
2) solution-polymerized styrene butadiene rubber
溶聚丁苯橡胶
1.
Oriented structure and mechanical properties of solution-polymerized styrene butadiene rubber/carbon black/short fiber composites;
溶聚丁苯橡胶/炭黑/短纤维复合材料的取向结构与力学性能
2.
Dynamic mechanical properties of solution-polymerized styrene butadiene rubber/carbon black/short fiber composite;
溶聚丁苯橡胶/炭黑/短纤维多相复合材料的动态力学性能
3) SSBR
溶聚丁苯橡胶
1.
Preparation and Properties of Solution Styrene and Butadiene Rubber(SSBR) Using Novel Structure Modifier;
新型结构调节剂制备溶聚丁苯橡胶及其性能研究
2.
The Properties of Vinyl-Polybutadiene by Iron Catalyst and SSBR made in JSR;
铁系乙烯基聚丁二烯与日本溶聚丁苯橡胶的性能
3.
Study on basic properties of SSBR T2530;
溶聚丁苯橡胶T2530基本性能的研究
4) solution polymerized styrene butadiene rubber
溶聚丁苯橡胶
1.
This paper reviewed manufacturing status and developing trends of initiator and modifier for solution polymerized styrene butadiene rubber(SSBR),and also summarized technologies used for SSBR continuous polymerization process including gel inhibiting,chain-end modification and hydrogenation.
综述了国内外溶聚丁苯橡胶(SSBR)的生产现状及其合成用引发剂和调节剂的发展方向;对SSBR连续聚合工艺的凝胶抑制技术、末端改性和氢化合成技术进行了概述。
2.
The research situation and the progress of continuous polymerization technology of home and abroad for high vinyl solution polymerized styrene butadiene rubber (SSBR)were reviewed in this paper.
综述了国内外高乙烯基连续溶聚丁苯橡胶(SSBR)的研究现状及其聚合技术进展。
5) solution polymerized styrene-butadiene rubber
溶聚丁苯橡胶
1.
Filler network and dynamic viscoelastic properties of silica/solution polymerized styrene-butadiene rubber composites;
白炭黑/溶聚丁苯橡胶复合材料的填料网络结构与动态黏弹性能
2.
Preparation, structure of carbon black-SiO_2 diphase nano-filler and properties of filled solution polymerized styrene-butadiene rubber compound;
炭黑-SiO_2双相纳米填料的制备、结构及其填充溶聚丁苯橡胶的性能
3.
Properties of oil-extended solution polymerized styrene-butadiene rubber filled with different silica
不同白炭黑填充充油溶聚丁苯橡胶的性能
6) S SBR
溶聚丁苯橡胶
1.
The chain structures of S SBR2305,Buna SL25 1 and E SBR1500 were analysed by FTIR,and the influences of these three SBRs on the wear resistance,heat build up,rolling resistance and wet traction of NR/SBR blend were investigated by the compression heat build up test with constant load,DMA etc.
采用傅立叶变换红外光谱 (FTIR)分析了溶聚丁苯橡胶 (S SBR)S SBR2 30 5、BunaSL2 5 1及乳聚丁苯橡胶E SBR15 0 0 3种SBR的链化学结构 ,采用定负荷压缩生热、动态力学谱 (DMA)等方法研究了 3种SBR对NR/SBR并用胶耐磨性、生热、滚动阻力及抗湿滑性的影响。
2.
The dynamic properties of S SBR blends and the influence of the proportions of blend components on them were investigated.
研究了溶聚丁苯橡胶 (S SBR)并用体系的动态力学性能以及并用体系各组分用量对胶料动态力学性能的影响。
3.
The theoretic basis for chosing ideal compound of performance tire and the characteristics of S SBR were described.
介绍了高性能轮胎理想胶料的理论基础及溶聚丁苯橡胶 (S SBR)的特性 ,对S SBR在高性能轮胎胎面中的应用进行了试验研究。
补充资料：溶聚丁苯橡胶
分子式：
CAS号：
性质：丁二烯和苯乙烯以丁基锂为引发剂，环已烷为溶剂，极性化合物（如四氢呋喃）为无规剂进行溶液聚合制备的共聚橡胶。通过控制聚合物的微观结构，特别是提高乙烯基含量及采用偶联技术和末端改性来改善其滚动阻力和抗湿滑性，使其滚动阻力和抗湿滑性与其他性能都达到最佳平衡。溶聚丁苯橡胶由于其低的滚动阻力和高的抗湿性和耐磨性，成为20世纪80年代以来世界丁苯橡胶发展的重点。因它符合当今世界轮胎技术进步，即同时满足轮胎对节能、高速安全、使用寿命和乘坐舒适的要求。而乳聚丁苯橡胶、顺丁橡胶和天然橡胶都做不到这点，据IISRP预测，西欧对溶聚丁苯橡胶的需求将达到8.8%的年增长率。为了满足生产多种牌号的要求，一般均采用间歇聚合，对自控有很高要求。生产成本比乳聚丁苯约高17%。
CAS号：
性质：丁二烯和苯乙烯以丁基锂为引发剂，环已烷为溶剂，极性化合物（如四氢呋喃）为无规剂进行溶液聚合制备的共聚橡胶。通过控制聚合物的微观结构，特别是提高乙烯基含量及采用偶联技术和末端改性来改善其滚动阻力和抗湿滑性，使其滚动阻力和抗湿滑性与其他性能都达到最佳平衡。溶聚丁苯橡胶由于其低的滚动阻力和高的抗湿性和耐磨性，成为20世纪80年代以来世界丁苯橡胶发展的重点。因它符合当今世界轮胎技术进步，即同时满足轮胎对节能、高速安全、使用寿命和乘坐舒适的要求。而乳聚丁苯橡胶、顺丁橡胶和天然橡胶都做不到这点，据IISRP预测，西欧对溶聚丁苯橡胶的需求将达到8.8%的年增长率。为了满足生产多种牌号的要求，一般均采用间歇聚合，对自控有很高要求。生产成本比乳聚丁苯约高17%。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条