说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 离焦补偿
1)  defocus compensation
离焦补偿
1.
007D separately,as it is corrected from the defocus compensation system.
研究表明,通过离焦补偿系统对模拟人眼的离焦量进行矫正,使被测量人眼的离焦量由2。
2)  coke compensation
焦炭补偿
1.
1 blast furnace of Jiuqang steel works has been successfully solved by the neutron-measuring moisture technology and unclear furnace temperture fluctuations were apparently decreased by coke compensation, thus solving the problem that coke moisture fluctuations affect the conditions of blast furnaces and supplying reliable data for blast furnace operation and producation.
利用中子测水技术成功地解决了酒泉钢铁公司 1、2号高炉入炉焦炭水分波动的问题 ,并进行焦炭补偿 ,使不明炉温波动减少 ,从根本上解决了入炉焦炭水分波动对高炉炉况影响的问题 ,为高炉操作和生产提供了可靠的依
3)  focus compensation
焦距补偿
1.
The new ventilation technology and patent technology of focus compensation are described in detail.
本文介绍了DI7000大功率投影幻灯的基本结构和用途,详细描述了其中采用的散热技术和焦距补偿专利技术,文章还介绍了DI7000大功率投影幻灯在2008年北京奥林匹克运动会开幕式演出中的应用情况。
4)  walkoff compensation
走离补偿
5)  compensation for reason of divorce
离因补偿
6)  centrifugal force compensation
离心力补偿
1.
Based on force and deformation analyses of chuck and workpiece at high speed turning,a new analytic computation model of dynamic clamping force for the chuck with centrifugal force compensation(CFC) was built and verified by means of experimental investigations.
通过对高速切削过程中卡盘和工件的受力与变形分析,建立了离心力补偿卡盘夹紧力变化的理论分析计算模型,并进行了实验验证。
2.
Taking the hollowed and wedged high-speed power chuck as an example,the mathematical models of centrifugal force compensation and general power jaw-chuck are built and the variation of practical cla.
以中空楔式高速动力卡盘为例,建立了离心力补偿动力卡盘及普通动力卡盘的数学模型,定量地分析了两种动力卡盘实际夹紧力随转速的变化规律。
补充资料:227902A焦炭筛操作规程
生产率:10吨/时
1、遵守铸造设备通用操作规程
2、检查三角皮带的松紧度就磨损情况,如过紧过松或磨损严重,应予调整或更换皮带。
3、检查筛板是否松脱,筛箱是否振裂,如有松脱或振裂的情况,应通知维修人员修理。
4、检查吊杆是否完好,筛箱是否平正,如有不完好或不平正情况,应通知维修人员调整。
5、先点动试车,然后空转2-3分钟,确认一切正常后,方可进行生产。
6、工作时,不要加过量的焦炭,否则影响选筛焦炭的质量。
7、工作后,筛箱不许停有焦炭,并清除被堵塞的筛孔。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条