1) ASME nozzles
ASME喷嘴
2) nozzle
[英]['nɔzl] [美]['nɑzḷ]
喷嘴
1.
Effect of pressure drop grading structure of feed nozzle for catalytic cracking process on atomization;
催化裂化进料喷嘴压降分级结构对其雾化效果的影响
2.
Analysis on Cooling Wind-box Nozzle of Strip Continuous Annealing Cooling Furnace;
带钢连续退火冷却炉冷却风箱喷嘴的分析
3.
Numerical study of three-dimensional flow field inside the nozzle of air jet vortex spinning;
喷气涡流纺喷嘴内部三维流场的数值研究
3) nozzles
[英]['nɔzl] [美]['nɑzḷ]
喷嘴
1.
Temperature and thermal stress analysis of coal water slurry ceramic nozzles with finite element method;
陶瓷水煤浆喷嘴温度场及热应力的有限元分析
2.
Meanwhile,the coking quality is improved through using large-flow nozzles device.
探讨了喷嘴的结构,焦炭在熄焦车内的分布情况,采用大流量喷嘴装置,改善了焦炭的质量。
3.
By using phase Doppler particle analyzer(PDPA) the atomization characteristics of two new BWJ(Ⅲ) types of high efficiency feeding atomization nozzles were studied in cold form experiment.
利用相位多普勒粒子分析仪,对BW J(Ⅲ)型干气雾化进料喷嘴的2种新型喷头雾化特性进行了冷态实验研究。
4) atomizer
[英]['ætəmaɪzə(r)] [美]['ætə'maɪzɚ]
喷嘴
1.
Droplet size of two-fluid airblast atomizer with lar ge water/air mass flux ratio;
大液气质量流量比双通道气流式喷嘴雾化滴径
2.
Comparison on new type swirling flow and intermixing pneumatic atomizers;
新型旋流式与内混式气动雾化喷嘴比较
5) spray nozzle
喷嘴
1.
Researches and Progress on the Spray Nozzles for Wet FGD;
湿法脱硫用喷嘴的研究与进展
2.
An Experimental Investigation on the Characteristics of the Atomization Spray Nozzles for Wet Desulphurization;
湿法脱硫雾化喷嘴特性实验研究
3.
Study on the spray characters of the spray nozzle by using PDA system;
应用PDA系统研究喷嘴的雾化特性
6) injector
[英][in'dʒektə] [美][ɪn'dʒɛktɚ]
喷嘴
1.
Effect of injector on pressure oscillation amplitude-frequency characteristics from pipeline to combustion chamber;
喷嘴对供应系统到燃烧室压力振荡传递幅频特性的影响
2.
Review of evolvement on dynamics of injector of liquid rocket engine;
液体火箭发动机喷嘴动力学研究进展
3.
Experimental investigation on shear coaxial injector combustion efficiency;
氢氧同轴式喷嘴燃烧性能试验研究
补充资料：AS
丙烯腈-苯乙烯共聚物是由丙烯腈和苯乙烯通过本体法、悬浮法或乳液法制得。透明或半透明的水白色颗航。相对密度1．06-1．08。折射率1．57。平衡吸水性0．66％。热变形温度82-105℃。具有高光泽、高透明、高冲击、良好的耐热性和机械性能。刚性大，具有较高的化学稳定性，耐水、耐油、耐酸、耐碱、耐醇类。溶于酮类溶剂和某些芳烃、氯代烃。耐候性中等，脆性较大。
拉伸强度 72-78MPa
冲击强度 2．1-2.5kJ/m2
洛氏硬度 R76-80
熔体指数 l. 4-3.3g/10min
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条