1) Q345E-Z35 steel
Q345E-Z35钢
2) Q345E steel
Q345E钢
1.
In this paper, combined with Q345E steel which made in WuHan Iron and Steel Company and based on those researches carried out in the laboratory, using the method of mathematical models combined with physical models to simulate the temperature change and microstructural evolution in the course of cooling a.
本文结合武钢热轧Q345E钢种，在实验室研究的基础上，采用物理模拟和数值模拟相结合的方法，对轧后冷却过程的温度及组织演变进行了研究和计算机模拟，对影响组织演变及力学性能的因素进行了探讨，并对钢材最终组织及力学性能进行了预报。
2.
In this paper,combined with Q345E steel which made in WuHan Iron and Steel Company,discussed the action of the temperature change and microstructural evolution in the course of cooling after hot rolling,analysised the factors which affect the microstructural evolution and mechanical properties of the Q345E steel to the microstruction.
本文主要研究武钢热轧Q345E钢种,探讨了该钢种在热连轧轧后冷却过程中温度变化、显微组织演变的行为,深入到微观,分析影响该钢种组织演变及力学性能的工艺因素。
3) Q345E steel pipe
Q345E钢管
1.
Judgment and selection were made of the welding procedure for circumferential seam welding of large-diameter & Oslash 1372 × 12 × L/Q345E steel pipe, based on low-temperature impact toughness, the major requirement for the welds.
概述了对φ1 372×12×L/Q345E钢管对接环缝的主要性能要求,即低温冲击韧性;进行焊接工艺评定和依据所得结果进行分析,获得可行的焊接工艺,保证了所要的低温冲击韧性。
4) E-Z35 offshore platform plate
E-Z35海洋平台用钢
5) Q345E heavy plate
Q345E厚板
1.
In view of the unqualified low temperature toughness of 60～80mm Q345E heavy plate in Shouqin Co.
在生产中通过增大粗轧道次压下率、降低精轧温度、采用水冷等措施,改善了Q345E厚板的低温冲击韧性,大大提高了产品的合格率。
6) Z35 drill press
Z35型摇臂钻床
1.
The aim of the paper is to recommend the application of PLC in reconstructing the Z35 drill press.
介绍PLC在Z35型摇臂钻床中的应用,根据Z35型摇臂钻床继电器控制电路的组成,确定PLC的输入输出点数,并进行PLC型号选择、I/O地址分配及I/O接线。
补充资料：[styrene-(2-vinylpyridine)copolymer]
分子式：
分子量：
CAS号：
性质：学名苯乙烯-2-乙烯吡啶共聚物。微黄色粉末或透明小颗粒晶体。无臭，无味。不溶于水，溶于酸、乙醇、丙酮、氯仿。有抗水、防潮性能，适用于多种药片的包衣等。
分子量：
CAS号：
性质：学名苯乙烯-2-乙烯吡啶共聚物。微黄色粉末或透明小颗粒晶体。无臭，无味。不溶于水，溶于酸、乙醇、丙酮、氯仿。有抗水、防潮性能，适用于多种药片的包衣等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条