1) Pd/PPy/foam-Ni electrode
Pd/PPy/foam-Ni电极
1.
Electrochemical reductive dechlorination of chloroform in acidic system was investigated using the Pd/PPy/foam-Ni electrode at ambient temperature.
cm-2,沉积时间40min条件下,通过电沉积方法制备Pd/PPy/泡沫镍(foam-Ni)电极,以Pd/PPy/foam-Ni电极为阴极研究酸性体系中三氯甲烷的电化学还原脱氯,实验在室温条件下进行。
2) Pd-Ni/PPy/GC electrode
Pd-Ni/PPy/GC电极
1.
Pd-Ni/PPy/GC electrode modified by polypyrrole film was prepared.
用聚吡咯(PPy)修饰GC制备Pd-Ni/PPy/GC电极,CV结果表明,Pd-Ni/PPy/GC电极具有比Pd-Ni/GC电极更大的氢吸附峰值,可以在-500mV(以Hg/Hg2SO4为参比电极)左右获得-32。
3) Pd-Ni/Ni electrode
Pd-Ni/Ni电极
4) Pd-Ni/GC electrode
Pd-Ni/GC电极
1.
The optimum preparation conditions of Pd-Ni/GC electrode were Ni2+=8.
通过电沉积法在玻碳板(GC)电极上负载钯镍双金属颗粒,并利用正交实验对其进行循环伏安(CV)研究,得到Pd-Ni/GC电极的最佳制备条件为:Ni2+=8。
5) polypyrrole film modified electrode
PPy薄膜修饰电极
6) Ag/Pd electrode
Ag/Pd电极
1.
The substrates of zirconia electrolyte were prepared by means of ceramic injection molding,the electrode slurry made of Ag/Pd was brushed on the both surfaces of sintered zirconia substrate,then the Ag/Pd electrodes were sintered under various temperature.
采用陶瓷注射成型技术制备了氧化锆固体电解质基体,在烧成的氧化锆基体上涂制Ag/Pd电极浆料,然后将电极在不同温度下烧结。
补充资料：[styrene-(2-vinylpyridine)copolymer]
分子式：
分子量：
CAS号：
性质：学名苯乙烯-2-乙烯吡啶共聚物。微黄色粉末或透明小颗粒晶体。无臭，无味。不溶于水，溶于酸、乙醇、丙酮、氯仿。有抗水、防潮性能，适用于多种药片的包衣等。
分子量：
CAS号：
性质：学名苯乙烯-2-乙烯吡啶共聚物。微黄色粉末或透明小颗粒晶体。无臭，无味。不溶于水，溶于酸、乙醇、丙酮、氯仿。有抗水、防潮性能，适用于多种药片的包衣等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条