1) electrothermal explosion ultra-high speed spraying
电热爆炸超高速喷涂
1.
MoSi_2-based coatings were in-situ synthesized on low carbon steel substrate by electrothermal explosion ultra-high speed spraying methods.
利用电热爆炸超高速喷涂技术,在低碳钢基体上原位合成了MoSi2及其合金化涂层。
2) electrothermal explosion spraying
电热爆炸喷涂
1.
Experiment study of in-situ synthesis MoSi2 coatings using electrothermal explosion spraying method;
电热爆炸喷涂法原位合成MoS_2i涂层的试验研究
2.
Preparing TiC-NiAl composite coating using electrothermal explosion spraying method;
电热爆炸喷涂法制备TiC-NiAl复合涂层的试验研究
3.
In-situ synthesis of FeAl and Fe3Al intermetallics coating was carried out by electrothermal explosion spraying pure aluminium to Q235 steel substrate,and the coating was analyzed by XRD,SEM,EDS and microhardness tester.
利用电热爆炸喷涂装置将纯铝喷涂到Q235钢基体上原位合成FeAl和Fe3Al金属间化合物涂层,通过X射线衍射仪、扫描电镜、能谱仪和显微硬度计对涂层的物相进行了分析。
3) wire explosion spraying
电爆炸喷涂
1.
A Mo/high-carbon steel composite coating on the substrate of aluminum alloy LY12 is sprayed on by wire explosion spraying.
采用电爆炸喷涂的方法,以钼和80号高碳钢为喷涂材料,在LY12铝合金圆筒零件的内表面上交替喷涂钼和高碳钢,制备了Mo/高碳钢复合涂层,并对涂层的形貌、结合强度、抗热震性和显微硬度等性能进行了检测。
2.
8%C)composite coating is prepared on LY12 substrate by wire explosion spraying method.
为了提高铝合金工件内表面的耐磨损能力,采用电爆炸喷涂技术在LY12基体上进行了制备钼和80号高碳钢复合涂层的实验研究。
4) electrical explosion spraying
电热爆喷涂
5) electric thermal explosion direction spraying
电爆炸定向喷涂
6) D-gun spraying
爆炸喷涂
1.
Application of ion implantation and D-gun spraying technology to improve Operation life for jet element of fluid efflux hammer;
应用离子注入和爆炸喷涂技术提高液动锤射流元件寿命
补充资料：电热
利用电能加热：～杯ㄧ～毯。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条