1) bridge type framework filter
桥式骨架过滤器
1.
2,considered that the main reason of water yield of XRJ2 smaller than XRJ1 about 60%(under same drawdown) is influenced by grouting in XRJ1 and with no relation to bridge type framework filter used in XRJ2 pumping test.
通过对XRJ1水文兼注浆试验孔、XRJ2注浆检查孔、水源井1号、水源井2号抽水试验资料的分析与研究,认为XRJ2注浆检查孔出水量(相同降深)较XRJ1孔减小了近60%的主要原因是XRJ1钻孔注浆影响所致,与XRJ2孔在抽水试验中使用的桥式骨架过滤器没有关联。
2) lattice type filter
桥式滤波器
3) through truss bridge
穿过式桁架桥
4) Formative frame as a desiderative-filter
形式过滤框架
5) bag filter
袋式过滤器
1.
An Experimental Study on the Pressure Characteristics of the Bag Filters at Initial Filter Stage
袋式过滤器过滤初期阶段滤袋压力特性的实验研究
2.
This paper analyzed the abnormal phenomena related to the increased pressure drop of bag filter,high pressure drop between inlet and outlet of conveying fan and overhigh electric current in the newly built powder conveying system of a high density polyethylene plant.
分析了高密度聚乙烯装置新建生产线粉料输送系统出现的袋式过滤器压差增大、输送风机进出口压差及电流较高等异常情况,其主要原因是该系统袋式过滤器过滤面积不足及粉料输送风机的进出口管线较长等。
3.
The paper introduces the structure,operation principle,characters and experimental results of the bag filter.
介绍袋式过滤器的结构、工作原理、特点和试验结果。
6) tubular filter
管式过滤器
1.
Matters needing attention for the operation of tubular filter and resin column;
使用管式过滤器和树脂塔的注意事项
2.
The theoretical spacing of tubular filter elements is predicted from firest priciples using flat model and more exact analysis taking into account the tube curvature.
利用平板数学模型及考虑了管子曲率的管束数学模型，可以推算出管式过滤器单元间的理论间距，对于不可压缩的滤饼，通过对某些经验参数的准确确定，利用普遍适用的设计方程能够成功地对管式过滤器进行设计。
补充资料：过滤过程与过滤机分类
过滤过程与过滤机分类  | |
|
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条