说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 稠油浅井
1)  shallow well with heavy crude
稠油浅井
1.
Study on cashing drilling technique in shallow well with heavy crude
稠油浅井套管钻井技术研究
2)  shallow heavy oil
浅层稠油
1.
Enhancing development efficiency in shallow heavy oil reservoir.;
提高浅层稠油油藏开发效果
2.
Experimental study of screen hanging sand control technology during steam injection development of shallow heavy oil;
筛管悬挂防砂工艺在浅层稠油注蒸汽开发中的试验研究
3.
There are abundant shallow heavy oil resources in Xinjiang oilfield.
新疆油田拥有丰富的浅层稠油资源,采用常规直井钻机钻浅层稠油水平井开发因地面距离目的层垂直井段短,使得钻井完井工艺面临一些特定的技术难题。
3)  viscous oil well
稠油井
1.
Logging technology for production fluid profile of the viscous oil well in Tahe oilfield;
塔河油田稠油井产液剖面测井工艺技术研究
2.
As slant well and viscous oil well are increasing,ordinary pump can't meet the well's regular production.
针对常规抽油泵在斜井和稠油井中抽液存在下行阻力大、下行困难和泵效低以及因井斜造成杆柱磨损等严重影响油田正常生产的问题,研制了偏置阀式稠油抽油泵。
3.
In many viscous oil wells and polymer injection wells,because of viscous oil and heavy load,the crank-balanced unit used is lacking balance and its effect is poor with low balance rate,thus energy consumption is raised.
许多稠油井、注聚井游梁式抽油机因为油稠、负荷重,采用目前的曲柄平衡存在平衡不足(四块平衡均调到头),且其效果差,平衡率低,耗能增加。
4)  heavy oil well
稠油井
1.
The incorporate technology of water-plugging,injectivity-controlling and sand control for heavy oil wells;
稠油井调堵防一体化工艺技术
2.
Cause analysis and measures for casing failure in Liaohe heavy oil wells;
辽河油田稠油井套管损坏原因分析与治理措施
5)  shallow super heavy oil
浅层超稠油
1.
On the basis of the analysis of the reason of poor response of cyclic steam stimulation pilot test for shallow super heavy oil reservoir in the 97 area of Karamay oilfield,electrothermal lifting test has been conducted and brought Well97066 back to normal production.
在对克拉玛依油田九7区浅层超稠油油藏蒸汽吞吐先导试验井效果差的原因分析基础上,进行电热举升技术试验,通过试验,使97066井恢复了正常生产,并取得了较好的吞吐效果,说明浅层超稠油油藏在蒸汽吞吐方式下应用电热举升技术可以实现经济开采。
6)  shallow heavy oil reservoir
浅层稠油藏
1.
The shallow heavy oil reservoir in Kelamyi is sandstone reservoir.
克拉玛依浅层稠油藏胶结疏松 ,油井易于出砂。
补充资料:稠油
又称“重质原油”。通常指密度大于1克/厘米3的原油。具有密度大、黏度高、轻油含量少等特点。含较多高密度的烃类和硫、氮、氧等杂环非烃化合物,需深度加工。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条