1) sonic non-destructive detection
声波无损检测
1.
Factors in quality of special bolts based on sonic non-destructive detection
基于声波无损检测的特殊锚杆质量影响因素
4) ultrasonic nondestructive testing
超声无损检测
1.
It is fast and whole testing that using the technology of ultrasonic nondestructive testing to estimate some performance of powder m.
针对粉末冶金(PM)零件在制备过程中不可避免存在的缺陷(气孔或裂纹),采用超声无损检测(NDT)技术对其进行了初步研究。
2.
To enhance the signal to noise ratio (SNR) of fundamental ultrasonic echo signals for ultrasonic nondestructive testing (UNDT) and ultrasonic nondestructive evaluation (UNDE), an improved technique to suppress structural noises of ultrasonic signals was presented.
为了提高超声无损检测(UNDT)与无损评价(UNDE)基础数据的信噪比(SNR),提出了一种基于神经网络模式识别理论的小波域超声信号消噪技术。
3.
A 5-axis automatic scanning system, the composition of hardware and software platform of it is present in ultrasonic nondestructive testing.
介绍了五轴超声无损检测自动扫描系统的工作原理 ,并详细介绍了其控制系统的硬件配置和软件组成 ,该系统能够控制机械装置带动探头实现对复杂曲面的自动扫
5) Ultrasonic nondestructive testing(UNDT)
超声无损检测
1.
To increase A-scan signals time resolution of thin multilayer composite materials in ultrasonic nondestructive testing(UNDT),a new approach of deconvolution technique based on wavelet multi-resolution analysis was proposed.
为了提高薄层复合材料超声无损检测(UNDT)中A扫描信号时域分辨率,提出一种基于小波变换多分辨率分析的反卷积技术新方法。
2.
A novel adaptive SSP technique based on the pattern recognition theory of support vector machine(SVM) was presented to enhance the signal to noise ratio(SNR) of fundamental ultrasonic echo signals for ultrasonic nondestructive testing(UNDT) a.
为了提高超声无损检测(UNDT)和无损评价(UNDE)中基础数据的信噪比(SNR),提出了一种基于支持向量机(SVM)模式识别理论的自适应裂谱分析方法。
3.
A new wide adaptability deconvolution technique based on wavelet transform and particle swarm optimization(PSO) was developed to increase the resolution of ultrasonic nondestructive testing(UNDT) of composite materials.
为了提高复合材料超声无损检测(UNDT)分辨率,提出一种基于小波变换和粒子群算法(PSO)的广谱反卷积新技术。
6) UNDT
超声无损检测
1.
In order to enhance the signal to noise ratio(SNR) of fundamental ultrasonic echo signal for ultrasonic nondestructive testing(UNDT) and ultrasonic nondestructive evaluation(UNDE),a new denoising technique for ultrasonic signal based on lifting wavelet transform multi-resolution analysis was presented.
为了提高超声无损检测(UNDT)和无损评价(UNDE)中基础数据的信噪比(SNR),提出了一种基于提升小波变换多分辨率分析的超声信号消噪新技术。
2.
of conventional deconvolution techniques were analyzed to increase A-scan signals\' time resolution of composite materials in ultrasonic nondestructive testing(UNDT).
为了提高复合材料超声无损检测中A扫描信号的时域分辨率,在分析传统反卷积技术需要先验知识等局限性的基础上,提出了一种基于提升小波变换和遗传算法的反卷积技术。
3.
In order to enhance the Signal to Noise Ratio(SNR) of fundamental ultrasonic echo signals for Ultrasonic Non-Destructive Testing(UNDT) and Ultrasonic Nondestructive Evaluation(UNDE),wavelet transform multi-resolution ability was used to denoise ultrasonic signals.
为了提高超声无损检测和无损评价中基础数据的信噪比,利用小波变换多分辨率性能实现对超声信号的消噪。
补充资料：厂房构件超声检测
厂房构件超声检测
vltrasonic testing of component part of industrial building
ehangfang gouj旧n Chaosheng一ianCe厂房构件超声检测(vltrasonle testing ofeomponenr part of inedustrial building)利用弹性波(声波)在介质中的传播特性对馄凝土构件进行无损检测的厂房安全检查方法。检测设备包括发射换能器、接收换能器和显示读数单元。检测时，发射换能器发出一定频率和振幅的超声波，经混凝土传播至接收换能器，利用传波速度、振幅衰减等参数，评价混凝土的内部质量。 声波在固体介质中的传播速度为: c一磅式中价为介质形状修正系数，Ed为介质的弹性模量，p为介质密度。 由此可见，声波在一定形状的混凝土中的传播速度与混凝土的弹性模量和密度相关，而弹性模量、密度又与强度有关。因此，测定混凝土的声波传播速度，可以推断其强度。另外，由于混凝土存在裂缝、脆疏等缺陷，声波在传播途中将产生绕射、折射、反射等现象，行程加长，波速相应减小，振幅衰减增大。缺陷愈严重，这种情况愈显著。 由于材料的复杂性，不可能建立波速和振幅衰减与混凝土强度及其内部缺陷的定量关系。在实际应用中，一般是以合格混凝土的声速或振幅衰减梯度为标准，将被测对象的侧量结果与之比较，根据其相对变化的大小，评价被侧构件的质量。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条