说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 临界强度因子
1)  critical intensity factor
临界强度因子
1.
Based on the classical elastic-plastic theory,an elastic-plastic finite element program was developed respectively for kinematic hardening material,which had a successful simulation of fatigue crack propagation with a singularity isoparametric element and the criterion of critical intensity factor.
基于弹塑性基本理论,针对随动强化材料模型,以临界强度因子为开裂准则,采用退化奇异单元并编制弹塑性有限元程序,成功地模拟了管材疲劳裂纹的动态扩展过程。
2)  critical stress intensity factor
临界应力强度因子
1.
Research on measuring tensile critical stress intensity factor of floor rock by hydraulic fracturing technique;
水压致裂技术测试底板岩体张开型临界应力强度因子
2.
The critical stress intensity factors K_(IC) are determined for pl.
采用沥青混合料设计试验、三点弯曲试验和疲劳裂缝扩展试验,确定加筋沥青混凝土的临界应力强度因子KIC,测量每一种沥青罩面抗裂系统的裂缝扩展速率。
3.
Two-parameter model was applied to determine the critical stress intensity factor K_(Ic)~s and critical crack tip opening displacement CTOD_c of concrete with different coarse aggregate sizes and silica fume dosages.
应用双参数模型确定混凝土在不同粗骨料粒径和不同硅灰掺量时的临界应力强度因子(K_(1c)~(?))和临界裂缝尖端张开位移(CTOD_c),同时利用特征长度l~(ch)研究粗骨料粒径和硅灰掺量对混凝土脆性的影响。
3)  threshold stress intensity factor
临界应力强度因子
1.
After the tests in 30%(WT) concentrations of sodium hydroxide solution with the 180 ℃,the crack growth rate and threshold stress intensity factors of the two steels were obtained,that were,the 16MnR steel between 0.
测得了180℃下30%NaOH溶液中两种材料的应力腐蚀临界应力强度因子和裂纹扩展速率,即16MnR材料的应力腐蚀裂纹扩展速率da/dt为0。
4)  critical dynamic stress intensity factor
临界动应力强度因子
1.
The generable proximate formula of dynamic stress intercity factor of simple edge crack found bar specimen in three point bending of NanLing marble is gotten and the critical dynamic stress intensity factor of the specimen is also obtained in medium load ratio.
在中等加载速率下,推导出对大理岩带垂直切口三点弯曲圆棒梁试件动应力强度因子的一般近似公式和断裂时的临界动应力强度因子的表达式。
5)  reference critical stress intensity factor
参考临界应力强度因子
6)  critical stress corrosion factor
临界应力强度因子
1.
The crack propagation rate da/dt and critical stress corrosion factor KISCC of SPV490Q weld were gotten by experiments.
对SPV490Q钢焊接接头的楔形张开加载(WOL)预裂纹试样在不同浓度硫化氢溶液中进行了应力腐蚀试验,测定了焊缝的应力腐蚀临界应力强度因子KISCC和应力腐蚀裂纹扩展速率da/dt。
补充资料:临界压缩因子
分子式:
CAS号:

性质:将以临界参量Tc,pc,Vm,c及对比变量Tr,pr,Vr,所表示的温度T=Tr·Tc,压力p=pr·pc和摩尔体积Vm=Vr·Vm,c代入压缩因子Z的定义式时,有Z=pVm/RT=prpcVrVm,c/RTrTc   =(pcVm,c/RTc)(prVr/Tr) =Zc(prVr/Tr)上式中的Zc=pcVm,c/RTc,称为临界压缩因子。由于存在着R=(8/3)(pcVm,c/Tc)的普遍关系,所以对于不同种实际气体来说,Zc均为3/8,是一个常数。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条