2) fruitingcharacter
出菇性状
3) fruiting
[英][fru:t] [美][frut]
出菇
1.
Study on the mechanism of “Yipenfa” promotion to the fruiting of Lentinus edodes;
“一喷发”促进香菇出菇的机理研究
4) extrusion characteristics
挤出特性
1.
Based on velocity and pressure fields calculated,the extrusion characteristics of tri-screw extruder,such as flow rate,back flow rate,mean shear rate,power consumption and productivity ratio,were calculated and compared wi.
通过速度和压力分布,计算了三螺杆挤出机的螺杆挤出特性参数,并和双螺杆挤出机进行对比分析。
2.
The extrusion characteristics of four-screw extruder,such as pumping capability,distributive mixing,dispersive mixing and productivity ratio,were calculated and compared with twin screw extrud.
利用计算所得的速度场和压力场,计算了四螺杆挤出特性,并和双螺杆、一字型排列和三角形排列的三螺杆挤出机进行了对比分析。
5) extracting characteristics
溶出特性
1.
Study on extracting characteristics of mineral elements in Laoshan green tea;
崂山绿茶矿质元素溶出特性的研究
2.
Study on the Extracting Characteristics and Peimary Speciation of Trace Elements in Bupleurum Chineses by FAAS;
柴胡中微量元素的初级形态及溶出特性研究
3.
Study on extracting characteristics of trace element in Lonicera japonica tea by FAAS;
金银花茶中微量元素的溶出特性研究
6) extrusion characteristic
挤出特性
1.
Based on above results,the post-processing program is employed to calculate the extrusion characteristics of tri-screw extruder.
利用速度场和压力场编制了后处理程序,计算了新型三螺杆反应器的挤出特性参数。
2.
The pressure, velocity and Viscosity distribution is discussed, and the extrusion characteristics of twin screw and tri-screw extruders are compared.
利用ANSYS软件包分析了聚乙烯在“一字”型排列三螺杆挤出机常规螺纹元件中的流动情况,讨论了整个流道的速度分布、压力分布、粘度分布,并和双螺杆挤出机常规螺纹元件的挤出特性进行了比较。
补充资料:白菜菇菇锅
原料:
姬松茸5朵
香菇5朵
笋片100克
大白菜300克
家乡咸肉150克
葱适量
姜适量
鸡高汤300毫升
辅料:
药材
党参9克
黑枣6颗
枸杞6克
调味料
料酒50毫升
做法:
1.姬松茸、香菇泡水洗净、笋片、葱、姜洗净;大白菜洗净,切块;家乡咸肉洗净、切小块。
2.全部材料放入锅中,加入料酒、党参、黑枣、枸杞及鸡高汤盖满材料。
3.炖煮30分钟即可食用。
tips:
1.姬松茸与香菇泡冷水20分钟后,洗净多冲几次水,可避免吃进一些添加物(如硫化物)。
2.这道菜冬天可用冬笋;春季可用春笋,也可用五花肉来取代家乡咸肉,但汤品要加盐。
特色:
菇菌类可抗癌、强肝、抗菌及促进新陈代谢,使体内废物及毒气顺利排除。姬松茸是抗癌菇类,鲜度不错哦!
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条