1) LQR function
LQR函数
2) LQR method
LQR法
1.
Based on the modern control method and an LQR method in which the vibration energy of the structure and the control signal energy are chosen as the object function is adopted to control the vibration of cantilever beam through using piezoelectric material.
基于现代控制理论,选用结构控制能量和控制信号能量作为控制目标函数的LQR法,利用压电材料对悬臂梁进行结构振动的主动控制。
2.
Based on the modern control method, a LQR method, in which the vibration energy of the structure and the control signal energy were chosen as the object function, was adopted to control the vibration of plate with various boundary conditions through using piezoelectric material.
本文基于现代控制理论选用结构控制能量和控制信号能量作为控制目标函数的LQR法,利用压电材料对各种支撑条件下的板进行结构振动的主动控制。
3) function
[英]['fʌŋkʃn] [美]['fʌŋkʃən]
函式、函数
4) LQR method
LQR方法
1.
To the question of the active vibration control for piezoelectric laminated structure, in order to optimize the effect of the vibration control, based on the modern control method, a LQR method, in which the vibration energy of the structure and the control singal energy were chosen as the object function, was proposed.
数值模拟的结果表明,该方法能达到更有效控制结构振动和减小控制能量消耗的目的,与一般的LQR控制方法相比,能满足系统多方面的设计要求且控制效果更优,从而验证了该LQR方法运用到结构振动主动控制中的可行性。
2.
By adopting the energy-based and LQR method,a swing up controller and a balancing controller are designed.
运用基于能量的控制方法设计了摇起控制器,利用LQR方法设计平衡控制器。
5) LQR control
LQR控制
1.
This paper presents the basic principles for designing LQR controller and PID controller.
本文在单级倒立摆系统模型的基础上,介绍设计LQR控制器和PID控制器的基本原理,并通过对单级倒立摆系统的控制仿真实验对比研究两种控制方法,给出了相应的结论。
2.
The mathematic model of rotational inverted pendulum is analysed, with the aids of LQR control and fuzzy control, a double structure control scheme compared with conventional LQR control is advanced.
为满足系统控制要求,又提出利用LQR控制和模糊控制组成双结构控制方案,其中模糊控制采用了T-S模糊控制方法, 并与原LQR控制方法进行了比较,仿真和实时控制结果表明,双结构控制可以使摆处于更平稳的状态。
3.
Based on actual vehicle suspension system, three typical LQR controllers based on various control objects are designed and analyzed.
基于实际的车辆悬挂系统,设计并分析了三种不同控制目标的LQR控制器和以悬挂变形作为唯一测量变量的观测器。
6) LQR controller
LQR控制器
1.
Optimization design for weighting matrix of LQR controller based on chaos variable;
基于混沌变量的LQR控制器权矩阵优化设计
2.
LQR controller design with pole's moving-range
基于根移动方法的LQR控制器设计
3.
Using the de- sign process of LQR controller as an example,the weighting matrixes Q and R of th.
以LQR控制器设计为例,采用遗传算法(GA)来优化LQR控制器的加权矩阵Q和R,使闭环控制系统在各控制回路单独阶跃下的输出与目标相一致,从而达到解耦的目的。
补充资料：[3-(aminosulfonyl)-4-chloro-N-(2.3-dihydro-2-methyl-1H-indol-1-yl)benzamide]
分子式：C16H16ClN3O3S
分子量：365.5
CAS号：26807-65-8
性质：暂无
制备方法：暂无
用途：用于轻、中度原发性高血压。
分子量：365.5
CAS号：26807-65-8
性质：暂无
制备方法：暂无
用途：用于轻、中度原发性高血压。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条