1) abrasive grain with negative rake angle
负前角磨粒
1.
Finite element analysis of grinding chip formation of single abrasive grain with negative rake angle
负前角磨粒磨削过程磨屑形成的有限元仿真分析
2) negative rake angle
负前角
1.
A coupled thermal-mechanical model was established for the grinding process of a single abrasive characteristic with negative rake angle based on the Deform-2D FEM software.
基于有限元软件Deform-2D,建立了具有负前角特征的单颗磨粒磨削热力耦合有限元模型。
3) negative land angle
负倒棱前角
1.
In this paper, the negative land angles of PCBN tools was determinedwhen the cutter was used to cut hardened steel.
本文研究了ＰＣＢＮ刀具负倒棱前角的合理选择，并用Ｘ射线衍射仪测量了加工表面残余应力，分析了负倒棱前角在形成表面残余压应力过程中的作用。
4) protuberance type pre-grinding hob
凸角型磨前滚刀
1.
Based on the generating principle,the conjugate curves of processed gear,cut by the different tool edges of Ⅰprotuberance type pre-grinding hob,were derived in terms of coordinate conversion.
基于APDL与MATLAB混合编程技术,精确地实现凸角型磨前滚刀切制的复杂齿形有限元几何建模,进而探讨了齿面摩擦力对齿轮弯曲强度与轮齿变形的影响。
5) abrasive particle
磨粒
1.
The results strongly indicate that both the abrasive particles and porosity in honing stone have an important effect on the service performance.
通过试验对比了国产与进口的氧化铝油石在粗珩阶段的磨削性能,利用扫描电镜观察了油石在加工前后的表面微观形貌,指出油石中磨粒及气孔等因素对油石的磨削能力有较大影响。
2.
The effect of the properties of abrasive particles in slurry, including the morphology and hardness, on the wear resistance of alumina-reinforced yttria-stabilized zirconia polycrystals (3Y-TZP/10wt%Al_2O_3, 10ADZ) was investigated in 5%NaOH slurry containing different abrasive particles using a pin-on-plate tribometer.
在不同磨粒的 5 %NaOH泥浆中 ,采用销 盘式摩擦磨损试验机考察了磨粒对氧化铝增强四方氧化锆多晶陶瓷材料 (ADZ)耐磨性的影响进行了研究。
3.
The wear properties of alumina reinforced Y-TZP composites in 5%NaOH slurry containing different abrasive particle were investigated using a block-on-block friction and wear test apparatus.
采用块 -块摩擦磨损试验机在不同磨粒的 5 %NaOH泥浆中 ,对氧化铝增强四方氧化锆多晶陶瓷材料 (ADZ)的磨损性能进行了研究。
6) wear debris
磨粒
1.
3D measuration and reconstruction technology is introduced in analysis of wear debris.
在铁谱分析中引入计算机三维测量与重构技术,通过使用改进拉普拉斯算子对在普通光学显微镜下拍摄到的磨粒连续图像序列进行清晰度分析来测量磨粒表面高度,重构磨粒三维图像。
2.
The evolutions of wear debris characteristics as wear progress in sliding wear process was studied.
为提高基于磨粒的机器状态监测的准确性,研究了磨粒特征随滑动磨损进程的变化规律。
3.
This project focused on the issue to establish the evaluation approach of surface features of wear components based on surface characteristics of wear debris.
建立了基于磨粒表面信息的磨损表面评估方法。
补充资料：倒押前韵
【诗文】：
白下同归路，乌衣枉作邻。珮声犹隔箔，香气已迎人。
酒劝杯须满，书羞字不匀。歌怜黄竹怨，味实碧桃珍。
翦烛非良策，当关是要津。东阿初度洛，杨恽旧家秦。
粉化横波溢，衫轻晓雾春。鸦黄双凤翅，麝月半鱼鳞。
别袂翻如浪，回肠转似轮。后期才注脚，前事又含颦。
纵有才难咏，宁无画逼真。天香闻更有，琼树见长新。
斗草常更仆，迷阄误达晨。嗅花判不得，檀注惹风尘。
【注释】：
【出处】：
全唐诗：卷683-81
白下同归路，乌衣枉作邻。珮声犹隔箔，香气已迎人。
酒劝杯须满，书羞字不匀。歌怜黄竹怨，味实碧桃珍。
翦烛非良策，当关是要津。东阿初度洛，杨恽旧家秦。
粉化横波溢，衫轻晓雾春。鸦黄双凤翅，麝月半鱼鳞。
别袂翻如浪，回肠转似轮。后期才注脚，前事又含颦。
纵有才难咏，宁无画逼真。天香闻更有，琼树见长新。
斗草常更仆，迷阄误达晨。嗅花判不得，檀注惹风尘。
【注释】：
【出处】：
全唐诗：卷683-81
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条