1) standard penetration method
标准贯入法
1.
The necessity to test the early strength of shotcrete by standard penetration method and the principle of the test method are presented in the paper.
介绍标准贯入法检测喷射混凝土早期强度的必要性及检测原理。
2) standard penetration test
标准贯入
1.
To identify saturated sand liquefaction,according to present regulations standard penetration test is used and complemented with static cone test,while shear wave velocity test can be used in areas where have experienced.
对于饱和砂土液化判别,目前规范要求以标准贯入试验为主,以静力触探为辅,有经验地区可采用剪切波速测试,但就目前的每种判别方法都有一定的局限性。
2.
On the basis of a large amount of laboratory simulation test in large medium tank and field in-situ tests,we set up relationship between the indexes of cone penetration test and standard penetration test and engineering properties.
在对沙漠砂室内大中型槽原位模拟试验和现场原位试验的基础上,建立了静力触探、标准贯入指标和沙漠砂密实度、抗剪强度间的经验关系,并且将部分经验公式表格化。
3.
Both standard penetration test and ultrasonic wave test are important methods in-site tests.
标准贯入与波速测试在工程勘察中都是较重要的原位测试手段,应用广泛。
3) standard penetration
标准贯入
1.
The stratum ranges that suitable for standard penetration test and heavy-duty dynamic sounding test are different.
标准贯入原位测试和重型 (2 )动力触探测试方法各适应不同地层范围 ,两者在同一地层中所测试承载力存在一定偏差。
2.
Authors made some tests including standard penetration on cement-soil piles, drilling for core and in-door compression without lateral confinement to accurately evaluate the construction quality of these cement-soil agitation piles.
通过对桩身水泥土进行标准贯入、钻孔取芯及芯样室内无侧限抗压试验,正确评价水泥土搅拌桩的施工质量。
3.
By analysis comparatively of the in?situ testing data, the relation among foundation s bearing capacity of swelling soil in Hefei, moisture content in nature, data of the static cone penetration testing and standard penetration testing is proposed.
通过对有关原位测试数据进行分析对比 ,基于载荷试验结果提出合肥地区膨胀土地基承载力与天然含水量及静力触探、标准贯入等测试指标之间的相互关
4) SPT
标准贯入
1.
Through analysis and compute on 29 item inestigating engineering s data of SPT,weight-type DPT and CPT in saturation sandy soil that they were in Beihai city,The author has setted up the relation formula of groundwater correct for SPT:N=N +4.
文章通过对北海市２９项勘察工程饱和砂土中标准贯入、重型圆锥动力触探和静力触探资料的分析计算，建立了标准贯入击数值地下水校正的关系式：Ｎ＝Ｎ’＋４５。
5) void ratio
标准贯入值
1.
Relationship between original shear modulus and void ratio or standary penetration test blow count;
土的初始剪切模量与孔隙比及标准贯入值相关关系
6) standard penetration test
标准贯入试验
1.
Discussions on standard penetration test in rock-soil engineering survey;
岩土工程测试中的标准贯入试验法
2.
The application of standard penetration test in the geological engineering investigation;
标准贯入试验在工程地质勘察中的应用
3.
Based on the engineering geological features in Tianjin and the related standards,the critical standard penetration test value for seismic liquefaction evaluation is defined by depth under the most disadvantageous conditions.
在采用标准贯入试验法进行粉土及砂土的液化判别过程中,根据天津地区实际地质及规范规定的条件下,可以最不利条件确定不同深度处的液化判定标贯击数临界值,然后在外业施工过程中,根据实测标贯击数大于最不利条件下的临界标贯击数时,可直接判定该标贯点粉土或砂土不液化,而不需取扰动土样进行室内颗粒分析试验,这样既满足规范的判定要求,减少室内试验的工作量,同时又能节约勘察成本,是值得采用的一种方法。
补充资料：德国国家标准(见德国标准化学会、德国标准体系)
德国国家标准(见德国标准化学会、德国标准体系)
National Standards of Germany: see Deutsches Institut für Normung, DIN;standards system of Germany
Oeguo Guol心日icozhun德国国家标准(Natio.吐S加Ln山切曲of Gen”旧ny)见德国标准化学会;德国标准体系。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条