1) benzoperoxide(BPO)
过氧化二苯甲酰(BPO)
1.
The production of trichlorotoluene is introduced using chlorine and toluene as raw materials,with benzoperoxide(BPO) as catalyst.
介绍了以氯气、甲苯为原料,采用过氧化二苯甲酰(BPO)为催化剂生产三氯甲苯。
2) Benzoperoxide
[,benzəu,pə'rɔksaid]
过氧化二苯甲酰
1.
Grafting of maleic anhydride on chlorinated polypropylene by free radical polymerization was carried out by using benzoperoxide as initiator;Effects of different reaction temperature,reaction time and different mass of MAH,BPO were studied,and the structure of product was characterized by FTIR.
以过氧化二苯甲酰(BPO)为引发剂,通过自由基聚合,采用马来酸酐(MAH)接枝改性氯化聚丙烯(CPP);研究了不同反应温度、不同反应时间和不同质量的MAH和BPO对改性PP包装膜的粘附性能的影响;得出较佳的工艺条件为反应温度85℃,反应时间2。
2.
Grafting of maleic anhydride(MAH) on chlorinated polypropylene(CPP) by free radical process was carried out using toluene as solvent and benzoperoxide(BPO) as initiator.
以甲苯为溶剂,过氧化二苯甲酰(BPO)为引发剂,通过自由基聚合,采用马来酸酐(MAH)接枝改性氯化聚丙烯(CPP),并对产物结构进行了FTIR表征。
3) Benzoyl peroxide
过氧化二苯甲酰
1.
The polymerization of unsaturated polyester resins initiated by benzoyl peroxide (BPO) and tertiary aromatic amine such as N,N-dimethyl aniline (DMA) , N,N-dimethyl-p-toluidine (DMT) and N-methyl-N-hydroxyethyl-p-toluidine (MHT) systems has been studied.
研究了过氧化二苯甲酰 (BPO)分别与芳叔胺N ,N -二甲基苯胺 (DMA)、N ,N -二甲基对甲苯胺 (DMPT)和N -甲基 -N -2 -羟乙基对甲苯胺 (MHPT)组成的体系引发不饱和聚酯树脂进行固化 ,在测定的温度范围内 ( 0 -4 0℃ ) ,芳叔胺的活性顺序为 :MHPT >DMPT >DMA。
4) dibenzoyl peroxide
过氧化二苯甲酰
1.
Poty(lactic acid)(PLA) grafted by acrylic acid(AA)was prepared with tetra- hydrofuran(THF)as solvent and dibenzoyl peroxide(BPO)as initiator.
以四氢呋喃为溶剂、过氧化二苯甲酰(BPO)为引发剂制备了丙烯酸接枝聚乳酸(PLA-g-AA)。
2.
Chlorinated polypropylene (CPP) grafted by hydroxylethyl methacrylate (HEMA) was prepared with free radical process in the presence of toluene as solvent and dibenzoyl peroxide (BPO) as initiator.
以甲苯为溶剂,过氧化二苯甲酰(BPO)为引发剂,采用甲基丙烯酸羟乙酯(HEMA)通过自由基聚合接枝氯化聚丙烯(CPP);考察了引发剂类型对接枝反应的影响;研究了反应时间、反应温度、BPO用量、HEMA用量对接枝率及接枝CPP黏合性能的影响,并对接枝产物进行了傅里叶变换红外光谱分析。
5) (di)benzoyl peroxide
过氧化(二)苯甲酰
6) BPO
过氧化二苯甲酰
1.
The high temperature resistant adhesive was prepared based on liquid polybutadiene epoxy resin(ELPB) cured by pyromellitic dianhydride(PMDA) and benzoyl peroxide(BPO).
采用均苯四甲酸酐(PMDA)和过氧化二苯甲酰(BPO)双固化剂固化聚丁二烯环氧树脂(ELPB),制备了ELPB/PMDA/BPO耐高温胶粘剂。
补充资料：过氧
过氧
guòyǎng
[peroxy-] 含有过氧物的特征基-o-o-
例:过氧焦硫酸盐
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条