1) casting method with two layers of castings per mould
双层铸件铸造工艺
2) Bimetal casting process
双金属铸造工艺
3) casting process
铸造工艺
1.
Application of CAE to Design of Casting Process for Piston;
CAE技术在活塞铸造工艺设计中的应用
2.
Improving on casting process with computer simulatoin of ZG1Cr18Ni9 valve body;
利用计算机模拟对ZG1Cr18Ni9阀体铸造工艺的攻关
3.
The Production and Casting Process of Nodular Iron Casting Body;
球墨铸铁件机体铸造工艺研究与生产实践
4) casting technology
铸造工艺
1.
Design and Realization of a Casting Technology CAD System by Further Development on Pro/E;
基于Pro/E的三维铸造工艺CAD系统的设计与实现
2.
Casting technology of cylinder sleeves for large marine diesel engines;
大型船用柴油机缸套的铸造工艺
3.
Casting Technology for Screwy Sheath of Double Screw Roller Grinded-paste Machine;
双螺旋辊式磨浆机螺旋套铸造工艺的研究
5) casting technique
铸造工艺
1.
The Optimal Casting Technique Design of Water Turbine Runners;
转轮体铸造工艺的优化设计
2.
Therefore computer aided design for structure and casting technique of supporting trunnion roller is realized.
针对传统回转窑托轮铸造工艺复杂、受力易产生轮辐开裂等状况,应用ABAQUS对其应力分布进行了分析,改进了托轮的结构。
3.
Through the improvement on casting process, the horizontal tilting metal mould casting technique has been adopted to produce Al alloy pressure-tight shells.
从铸造工艺、工装设计上进行改进创新,采用横向翻转浇注工艺铸造耐压外壳铸件。
6) foundry method
铸造工艺
1.
An introduction was made to the foundry method of CY4D series diesel engine cylinder block and head,as well as the quality problems met during the trial production and their prevention measures including: leakage of cylinder head; dimensional deviation of block after machining and cylinder cores cracking.
介绍CY4D系列柴油机缸体的铸造工艺特点,试制过程中出现的包括缸盖渗漏、缸体加工尺寸偏差和缸体缸孔穿芯等质量问题,以及相应的解决措施。
2.
The foundry method design of a nodular iron reductor housing with ferrite matrix was de-scribed.
介绍了铁素体基体球铁减速器壳体的铸造工艺设计。
3.
The foundry method scheme, gating system design, melting and treatment of the molten iron was described.
对铸件的工艺难点进行了分析,介绍铸造工艺方案,浇注系统设计,和铁 液熔炼、处理工艺。
补充资料：双[1-(4-二甲氨基)苯基2-苯基1,2-二硫代乙烯合镍]
分子式：
CAS号：
性质：紫黑色单斜晶体。熔点277～278℃。溶于苯、甲苯、三氯甲烷等大多数有机溶剂。红外频率υ(C＝S)1190、1165、1140cm-1,红外频率υ(S-C-C-S)880cm-1。由对二甲氨基安息香、五硫化二磷在二噁烷(二氧六环)中反应后,加入镍(Ⅱ)盐溶液制得。用作光学非线性材料。
CAS号：
性质：紫黑色单斜晶体。熔点277～278℃。溶于苯、甲苯、三氯甲烷等大多数有机溶剂。红外频率υ(C＝S)1190、1165、1140cm-1,红外频率υ(S-C-C-S)880cm-1。由对二甲氨基安息香、五硫化二磷在二噁烷(二氧六环)中反应后,加入镍(Ⅱ)盐溶液制得。用作光学非线性材料。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条