说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 铝液波动
1)  metal pad wave
铝液波动
1.
In cells with carbon in bath the spectral mainlobe of cell voltage is still due to the fluctuation of molten alumina at anodes and the sidelobe is due to the fluctuation of carbon in bath;in cells with metal pad wave, the spectral mainlobe is due to metal pad waving and the sidelobe is still due to the fluctuation of molten alumina at anodes.
研究结果表明:不同的参数估计法得到趋于一致的频谱分析结果,正常槽只有1个尖锐谱峰,对应于阳极下熔融氧化铝涌动的特征峰,其他故障槽都有2个特征谱峰,即1个主峰和1个次峰,碳渣槽的主峰仍然对应着阳极下熔融氧化铝涌动特征峰,次峰对应悬浮碳渣的涌动特征峰;铝液波动槽主峰对应铝液波动特征峰,次峰对应着熔融氧化铝涌动的特征峰;频谱分析相对于小波包分析具有算法简单、耗时少、物理意义明确等特点,在槽况在线诊断系统的大规模推广中具有优势。
2)  level fluctuation of liquid aluminum
铝液液面波动
1.
Design of real-time monitoring system for level fluctuation of liquid aluminum in aluminum electrolytic cell
铝电解槽阴极铝液液面波动实时监测系统设计
3)  level fluctuation
液面波动
1.
Water model simulation on liquid steel level fluctuation of cast mould at No.2 Steel-making Plant of TISCO;
太钢二炼钢结晶器液面波动的水模拟研究
2.
The behavior of level fluctuation of molten metal in the slab continuous casting mold with static magnetic field has been studied by using Pb-Sn-Bi alloy model.
用Pb-Sn-Bi低熔点合金进行了热模拟实验,研究了在静磁场作用下板坯连铸结晶器内的液面波动行为。
3.
Based on the150 mm×(1 600~3 250) mm wide slab caster mold as investigating object,the level fluctuation in the mold of the wide slab continuous casting was simulated by a three dimensional finite-volume model(VOF) which had been formulated according to the commercial code ANSYS CFX10.
0建立了一个三维有限体积模型,采用多相流的VOF模型对结晶器内保护渣-钢液界面波动进行数值模拟,重点研究了拉速、水口倾角、铸坯断面宽度等工艺参数对结晶器内液面波动的影响。
4)  mould level fluctuation
液面波动
1.
Practice on mould level fluctuation control of vertical-bending type caster in refining peritectic steel;
直弧形铸机生产包晶钢结晶器液面波动的控制
2.
Based on experience of 1700 ASP medium-thin slab continuous casting ultra-low carbon steel at An Steel,the factors affecting mould level fluctuation were analyzed systemically,and the corresponding control measures were put forward.
结合鞍钢1700ASP 中薄板坯连铸生产超低碳钢的实践,系统分析了影响结晶器液位波动的因素,并据此采取了相应的控制措施,有效地控制了结晶器的液面波动,提高了铸机的恒拉速率,为鞍钢1700ASP 中薄板坯连铸机的稳态浇铸提供了保证。
5)  Level fluctuation
液位波动
1.
The characteristics of fluid flow in the mold with the four-port SEN of FTSC have been studied and the influence of SEN on the level fluctuation is investigated by using water modeling method.
本文采用水力学模拟实验方法,研究了达涅利FTSC薄板坯连铸四孔型水口的结晶器流场特征及其对液位波动的影响。
2.
Unsteady fluid flow and level fluctuation in mould have a significant influence on the steel shell and breakout accident for thin slab casting.
模拟结果表明,连铸结晶器内部的湍流流场主要由射流区、上部回流区、下部回流区三个典型区域组成,上下两回流区的变化的规律性导致薄板坯连铸机结晶器钢液表面液位波动的规律性变化。
6)  liquid film wave
液膜波动
补充资料:浓氯化钠注射液 ,高渗氯化钠注射液,高张氯化钠注射液
药物名称:浓氯化钠注射液

英文名:Injection 10% Sodium Chloride

别名:浓氯化钠注射液 ,高渗氯化钠注射液,高张氯化钠注射液
外文名: Injection 10% Sodium Chloride, Hypertonic saline
适应症: 用于脱水症及调节体内水与电解质的平衡。
用量用法: 静脉滴注,临用前稀释,用量与浓度视病情需要而定。
注意事项: 心、肾功能不全者慎用。
规格: 注射剂:1g/10ml,本品为氯化钠的高渗灭菌水溶液。



类别:调节水、电解质及酸碱平衡药
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条