1) epoxy resin floor
环氧树脂地坪
1.
Analysis of the quality control points for epoxy resin floor
浅析环氧树脂地坪质量控制要点
2) epoxy floor level
环氧地坪
1.
This article introduces in details the epoxy floor level construction in a factory building to the foreign and domestic fellow members for reference.
环氧地坪较之水磨石、地面砖等有许多优点,文章详细介绍了某工业厂房的环氧地坪施工,供国内同行借鉴。
3) epoxy resin floor paint
环氧树脂地板漆
4) epoxide resin
环氧树脂
1.
Organic-inorganic hybrid composites were prepared by the sol-gel method for the wear-resistant coating on epoxide resin and TEOS,KH-560,KH-570 were used as starting materials.
以正硅酸乙脂、KH-560、KH-570为先驱体,采用溶胶-凝胶法结合旋转涂敷法在环氧树脂基体上制备了有机硅耐磨涂层。
2.
A new woodceramics was fabricated from wood powder and epoxide resin.
以香杉木粉和环氧树脂为原料制备了木材陶瓷,利用TGA对木粉、环氧树脂的热分解过程进行了研究,通过扫描电镜、X射线衍射技术对木材陶瓷的微观结构和物相进行表征,研究了碳化温度对木材陶瓷得碳率、体积收缩率、耐磨性的影响。
3.
The aqueous polyurethane modified by epoxide resin(WPUE) was prepared with trimethylolpropane(TMP) as cross linker, then epoxide-acrylate-polyurethane(WPUEA) hybrid dispersions were synthesized by free-radical emulsion polymerization which were carried out by using azodiisobutyronitrile (AIBN) as initiator and methyl methacrylate (MMA) as monomer.
以三羟甲基丙烷(TMP)为交联剂,先用环氧树脂改性聚氨酯(PU),得到环氧树脂改性的水性聚氨酯(WPUE)分散体,然后加入甲基丙烯酸甲酯(MMA)和引发剂偶氮二异丁腈(AIBN),通过自由基乳液聚合得到聚氨酯-环氧树脂-丙烯酸酯(WPUEA)杂合分散体,并通过傅里叶红外光谱、凝胶渗透色谱、粒径分析仪和透射电镜对其进行了表征。
5) epoxy
[英][ɪ'pɔksi] [美][ɪ'pɑksɪ]
环氧树脂
1.
Study on the curing process of benzoxazine-epoxy copolymerization;
苯并口恶嗪/环氧树脂共聚固化过程研究
2.
Effect of Nano-SiO_2 on Properties of PP/Epoxy Blends;
纳米SiO_2对聚丙烯/环氧树脂共混物性能的影响
3.
Synthesis and Low Surface Energy Property of New Polyblends of Amino(polysiloxane)-polyurethane-epoxy and PTFE;
聚四氟乙烯、有机硅复合改性聚氨酯/环氧树脂共混聚合物的合成及其低表面能特性
6) epoxy resins
环氧树脂
1.
Intrinsically fire retardant phosphorus-based epoxy resins;
含磷本质阻燃环氧树脂的研究进展
2.
Research advances in epoxy resins modified by inorganic nano-particles;
无机纳米粒子填充改性环氧树脂研究进展
3.
The developments in investigating waterborne curing agents for epoxy resins;
水性环氧树脂固化剂研究进展
补充资料：环氧地坪用硅微粉
目数: 600-1250目
sio2: >99%
白度: 70-94度之间(客户自选)
硬度: 7 (莫氏硬度)
粘度低、流动性好、堆积性好、易压实，与环氧树脂类易结合。与传统硅微粉比较可节约环氧树脂用量。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条