2) wet phosphoric acid production
湿法磷酸生产
1.
With regard to the fouling and plugging problems in the filtrate and the first washing liquid path in the filtering process of wet phosphoric acid production,it proposes ammonium salt as fouling inhibitor.
针对湿法磷酸生产过滤工序滤液和一洗液通道易结垢堵塞问题,提出了以铵盐为阻垢剂。
2.
The mixed acid cooling process is proposed as a result of in-depth analysis of reaction heat removal from the extraction stage of wet phosphoric acid production and the elimination of local supersaturation of calcium sulphate,with an intention to better resolve both problems so as to increase the production intensity of the phosphoric acid reactor and material yield.
通过对现有湿法磷酸生产中移走萃取工序的反应热和消除硫酸钙局部过饱和问题的深入分析,提出了混酸冷却工艺,旨在更好地解决这两个问题,以提高磷酸反应槽的生产强度和物料收率。
3.
The impact of high or low n(SiO 2)/n(F) on the wet phosphoric acid production is analyzed by focusing on the impact on the normal operation of the offgas scrubbing system.
分析了n(SiO2)/n(F)偏高或偏低时对湿法磷酸生产的影响,着重讨论了对尾气洗涤系统正常生产的影响,通过对卧式错流洗涤器洗涤液配置等的改进,用硅氟摩尔比偏高的磷矿生产湿法磷酸时,取得了较好的效果。
3) wet-process phosphoric acid production
湿法磷酸生产
1.
In view of the disadvantages of Chinese pumps for wet-process phosphoric acid production,the JSB alloy for key parts and components,JFZ series horizontal pumps with corrosion and erosion resistant,JLFZ series vertical pumps with corrosion and erosion resistant and JHZ series horizontal axial flow pumps are developed based on the amassed experiences.
针对国产化的湿法磷酸生产用泵不足之处,根据所积累的经验,开发了关键零部件用的JSB合金、JFZ系列卧式耐腐蚀耐磨蚀泵、JLFZ系列立式耐腐蚀耐磨蚀泵和JHZ系列卧式轴流泵,介绍了JSB合金的材料特性和适用范围、这些泵的结构特点和应用。
2.
For the abnormal phenomena occurred in the wet-process phosphoric acid production process of Shanxi Huashan Chemical Group Co.
结合陕西华山化工集团有限公司复肥厂湿法磷酸生产过程中,曾出现萃取槽搅拌轴上包裹物大如"碌碡"、过滤冲盘污水槽底沉淀物闪亮发光、过滤系统石膏滤饼板结、污水渠中有矿粒、萃取尾气烟囱冒红烟等异常现象,重点分析其物质组成、形成原因和影响程度,并阐述所采取的相应对策。
4) Wet grinding line
湿法粉碎生产线
1.
Ball mill superfine wet grinding line of zirconium silicate and its technical characteristics
球磨超细硅酸锆湿法粉碎生产线及工艺特点
5) acrylic fibres by wet method
湿法生产腈纶
6) neXformer wet-laid
neXformer湿法生产线
1.
In this article the neXformer wet-laid and complete lines for the most varied areas of application, from stock preparation via the neXformer down to drying and winding were presented.
从原料制备到烘燥卷绕,详细介绍了用途广泛的neXformer湿法生产线。
补充资料：湿法
分子式：
CAS号：
性质：又称淤浆法，湿法等。色谱柱填充方法有干法和湿法两种。填料粒度大于20gm的可用干法填充。小于20μm的填料，由于具有很高的表面能，往往容易黏结，因而采用湿法。选择一种或数种溶剂作分散、悬浮介质，经超声处理使微粒在介质中高度分散并呈悬浮状半透明匀浆，然后在高压下把匀浆压入柱管中，制成具有均匀紧密填充床的色谱柱。高效液相色谱法中的色谱柱通常用匀浆填充法填充。
CAS号：
性质：又称淤浆法，湿法等。色谱柱填充方法有干法和湿法两种。填料粒度大于20gm的可用干法填充。小于20μm的填料，由于具有很高的表面能，往往容易黏结，因而采用湿法。选择一种或数种溶剂作分散、悬浮介质，经超声处理使微粒在介质中高度分散并呈悬浮状半透明匀浆，然后在高压下把匀浆压入柱管中，制成具有均匀紧密填充床的色谱柱。高效液相色谱法中的色谱柱通常用匀浆填充法填充。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条