1) neutral-point-clamped converter
二极管钳位变换器
3) three-level neutral point diode-clamped converter
二极管钳位式三电平换流器
1.
This paper mainly studied the modeling and simulation of VSC-HVDC based on Real-Time Digital Simulator, which include the NPC(three-level neutral point diode-clamped converter) VSC independent control strategy of active and reactive power in the condition of inversion and rectification, provided the transient control strategy when VSC is connected with passive network based on this.
本文重点研究了基于实时数字仿真器(RTDS)的柔性化直流建模与仿真工作,其中包括二极管钳位式三电平换流器在有源逆变与整流状态下的有功无功的独立控制,在此基础上提出了暂态时无源逆变状态下换流器的控制策略,进行了受端为有源系统的功率传输、换流器的四象限运行、直流电压调节以及潮流翻转试验;受端为无源系统时稳态条件下功率传输、直流电压控制以及定交流电压可控制试验;受端为无源系统时暂态条件下有功与无功需求发生较大变化时的定交流电压控制试验。
4) clamping diodes
钳位二极管
1.
Introducing a resonant inductance and two clamping diodes into the full-bridge converter can widen the load range of ZVS and eliminate the voltage oscillation across the rectifier diodes.
在全桥变换器中引入谐振电感和钳位二极管,可以使开关管在较宽的负载范围内实现零电压开关,并且消除输出整流二极管上的电压尖峰。
2.
In order to eliminate the voltage oscillation caused by the reverse recovery of the rectifier diodes, a resonant inductance and two clamping diodes can be introduced to the primary side.
为了消除输出整流管的电压尖峰,可以在原边加入一个谐振电感和两个钳位二极管。
3.
The theory and soft-switching technology of Phase-shifted ZVS PWM DC/DC full-bridge converter including two clamping diodes are present in this thesis.
本文研究了加钳位二极管的移相全桥ZVS PWM DC／DC变换器的工作原理和软开关技术的实现，和传统移相全桥ZVS PWM DC／DC变换器比较，该变换器增加了滞后桥臂ZVS的实现范围，抑制了副边的寄生振荡和电压尖峰。
5) diode-clamp
二极管钳位
1.
The working principle is analyzed in details for the single-phase three-level diode-clamp PWM rectifiers.
详细分析了单相三电平二极管钳位PWM整流器的工作原理,得出了其开关等效电路。
6) clamp diode
钳位二极管
1.
The clamp diode can adjust the discharge status efficiently,and the stability of plasma generator is enhanced.
实验发现:在放电回路中使用钳位二极管可以有效地调整脉冲放电状态,提高等离子体发生器工作稳定性;调整放电回路的参数值也实现了回路的过阻尼放电,达到使用二极管整流的效果。
补充资料：二极管
有两个电极的电子管或晶体管。参看〖晶体管 〗、〖电子管 〗。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条