1) simple supported-to-continuous girder bridge
先简支后连续箱梁
1.
Combining with concrete project,the author analyzes the advantages of simple supported-to-continuous girder bridge in practical project,introduces the forcing characteristics and design important points of simple supported-to-continuous girder bridge emphatically,and discusses its construction process,thus promoting application of simple supported-to-continuous girder bridge on project.
结合具体工程实例,分析了先简支后连续结构体系在实际工程中的优点,重点介绍了先简支后连续箱梁桥的受力特点和设计要点,并且论述了其施工过程,从而推广先简支后连续梁桥在工程中的应用。
2) simple-continuous box beam bridge
先简支后连续箱梁桥
3) Beam constructed by simple and continuous support
先简支后连续梁
1.
Test study of the static and dynamic property on prestressed concrete beam constructed by simple and continuous support;
预应力混凝土先简支后连续梁静载试验研究
4) simply supported-to-continuous beam
先简支后连续梁
1.
Fatigue behaviour and anticrack property of simply supported-to-continuous beam;
先简支后连续梁桥结构的疲劳性能与抗裂性能
2.
Test research of the fatigue behaviour and anticrack property on thesimply supported-to-continuous beam of the railway;
铁路先简支后连续梁疲劳性能与抗裂性能试验研究
5) simple supported then continued prestressed concrete box girder
先简支后连续预应力混凝土小箱梁
6) continuous bridge erected as simple-supported T-beam
先简支后连续桥梁
1.
Construction of wet joint of 30m continuous bridge erected as simple-supported T-beam;
30m T梁先简支后连续桥梁湿接缝的施工
补充资料：ANSYS壳单元分析箱梁
! Analysis a box beam section with shell elements of ANSYS
! 用ansys的壳体单元分析箱梁
! Box dimension: 10*4*4m with shell thickness of 0.04m
! By Lu Xinzheng, Depart. Civil Engineering, Tsinghua University, Beijing
! 陆新征，清华大学土木系
! Aug. 2004
! Define the Element
! 定义单元
/PREP7
!*
ET,1,SHELL93
!*
! Define the section for shells
! 定义壳单元截面
R,1,.04, , , , , ,
!*
! Define the material
! 定义材料
MPTEMP,,,,,,,,
MPTEMP,1,0
MPDATA,EX,1,,200e9
MPDATA,PRXY,1,,.3
! Setup the model
! 建模
! Define the keypoints
! 定义关键点
k,1,0,0,0
k,2,4,0,0
k,3,4,4,0
k,4,0,4,0
! Define the lines
! 定义线
l,1,2
l,2,3
l,3,4
l,4,1
! Define the section area
! 定义截面
a,1,2,3,4
! 用ansys的壳体单元分析箱梁
! Box dimension: 10*4*4m with shell thickness of 0.04m
! By Lu Xinzheng, Depart. Civil Engineering, Tsinghua University, Beijing
! 陆新征，清华大学土木系
! Aug. 2004
! Define the Element
! 定义单元
/PREP7
!*
ET,1,SHELL93
!*
! Define the section for shells
! 定义壳单元截面
R,1,.04, , , , , ,
!*
! Define the material
! 定义材料
MPTEMP,,,,,,,,
MPTEMP,1,0
MPDATA,EX,1,,200e9
MPDATA,PRXY,1,,.3
! Setup the model
! 建模
! Define the keypoints
! 定义关键点
k,1,0,0,0
k,2,4,0,0
k,3,4,4,0
k,4,0,4,0
! Define the lines
! 定义线
l,1,2
l,2,3
l,3,4
l,4,1
! Define the section area
! 定义截面
a,1,2,3,4
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条