1) organizations interface
组织界面
1.
Some conceptions related to the organizations interface management were introduced,the major organizations interface obstructs and their causes of agency in large-scale engineering projects were analysed.
文章介绍了组织界面管理理论的相关概念,分析了大型工程项目中代建方所面临的主要组织界面障碍及成因,提出了相应的组织界面管理措施,即管理模式优选创新化,组织结构设计扁平化,工作任务及管理职能分工清晰化,工作流程集成化和工程信息管理网络化。
2) interfacial microstructure
界面组织
1.
The interfacial microstructures and fracture surfaces were investigated by scanning electron microscopy and electron energy spectrum analysis .
利用扫描电镜及EDS能谱分析的方法对接头的界面组织及断口形貌进行了研究。
2.
The interfacial microstructure and properties of brazed joints of Ti_3Al-based alloy were investigated.
研究了Ti3Al基合金真空钎焊及接头组织性能; 分析了不同钎料对接头界面组织和剪切强度的影响,初步优选了钎料, 优化了钎焊连接规范参数; 利用电子探针、扫描电镜和X射线衍射等方法对接头进行了定性和定量分析。
3.
In order to meet the requirement of joining graphite to copper, the interfacial microstructure and the mechanical properties of the graphite brazed to copper were investigated.
借助扫描电镜、能谱分析、X射线衍射分析、压剪试验等分析测试手段,分析了石墨/Ag-Cu-Ti/Cu真空钎焊接头和石墨/Ni/Sn-Ag-Cu/Cu接头的界面组织结构、室温力学性能、不同的工艺参数对界面组织的影响,并对钎焊界面结构的形成机理进行了研究。
3) interface microstructure
界面组织
1.
As Al content of the solder alloy increases,the interface microstructure transforms to stick shape.
Zn-Al钎料中Al含量较低时,焊缝中铜一侧界面上生成层状组织,在铜母材中有过渡层存在;提高Al含量,界面组织形貌向笋状转化;进一步提高Al含量,过渡层变窄。
4) interfacial structure
界面组织
1.
A research on the interfacial structure and performance of stainless clad plate 0Cr18Ni9-08Al-0Cr18Ni9 has been made in different states by using optical microscope and SEM,to offer a theoretical and experimental base for improving and selecting a reasonable technology for producing stainless clad plate.
采用光学显微镜、扫描电镜等手段,对0C r18N i9-08A l-0C r18N i9不锈钢复合板在不同状态下的界面组织结构及其性能进行了研究,以期为改进和选择合理的生产工艺提供可靠的理论和实验依据。
2.
The results show that the bonding of Ti_3Al-based alloy can be accomplished by Ag-Cu-Zn brazing filler metal, the interfacial structure between Ti_3Al-based alloy is composed of TiCu, Ti (Cu, Al)_2 and Ag solid solution.
研究用AgCuZn钎料真空钎焊Ti3Al基合金的过程,分析界面组织微观结构、接头室温强度与钎焊连接参数之间的关系。
3.
The galvanized steel sheet was joined by pulsed arc brazing process, and the joint interfacial structures and properties of the joints at different pulse frequencies were studied, which the arc pulse frequencies are 100 to 2000 Hz.
主要研究脉冲频率变化对接头界面组织和力学性能的影响。
5) interface structure
界面组织
1.
The interface structure of the joint was observed and analyzed by SEM and energy spectrum analysis instrument.
采用Ni基箔片钎料对GH3044镍基合金进行钎焊连接,利用电子扫描显微镜(SEM)及能谱分析仪,对接头的界面组织进行观察和分析;采用电子万能试验机对GH3044镍基合金的钎焊接头进行抗剪试验,评价接头的室温抗剪强度。
补充资料：组织
分子式：
CAS号：
性质：通常由结构和功能相似的细胞和细胞间物质组成的、具有一定结构的聚集体。
CAS号：
性质：通常由结构和功能相似的细胞和细胞间物质组成的、具有一定结构的聚集体。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条