1) AM50-1%Gd alloy
AM50-1%Gd合金
1.
Influence of hot extrusion on microstructure and properties of AM50-1%Gd alloy
热挤压对AM50-1%Gd合金组织与性能的影响
2) AM50 magnesium alloy
AM50镁合金
1.
Study on TIG welding performance of AM50 magnesium alloy;
AM50镁合金的TIG焊接性研究
2.
The process of direct electroless plating Ni-P on the surface of AM50 magnesium alloy as-casted was investigated.
研究了压铸态AM50镁合金表面直接化学镀镍工艺,介绍了工艺流程、镀液成分和工艺参数,通过扫描电镜(SEM)和X射线衍射技术(XRD)对镀层组织结构、形貌和磷含量进行了检测分析。
3.
The effects of Ti and B on the microstructure and mechanical properties of AM50 magnesium alloy had been investigated.
对在AM50镁合金中添加不同微量钛、硼元素后的微观组织和力学性能的变化规律进行了研究。
3) AM50 alloy
AM50合金
1.
Research of the influence on the grain size and anti-corrosion properties of AM50 alloy by Ca melt treatments and electromagnetic stirring process was done.
研究了AM50合金采用钙进行熔体处理和电磁搅拌后晶粒形貌及大小与耐腐蚀性能的变化。
2.
By means of hot extrusion and measurement of the mechanical properties,the influences of the trace Gd and hot extrusion treatment on microstructure and mechanical properties of AM50 alloy are investigated by microstructure observation OM、SEM and TEM.
通过对AM50、AM50-1%Gd合金进行不同条件的热处理、热挤压处理,及室温和高温力学性能测试,并采用金相显微镜、扫描电镜、透射电镜对不同状态合金进行组织形貌观察,研究了微量元素Gd及热挤压处理对AM50合金组织与性能的影响。
4) AM50 magnesium alloy die casting
压铸镁合金AM50
5) Gd-Co alloys
Gd-Co合金
1.
The influence of Al addition to Gd-Co alloys were investigated by X-ray diffraction,scanning electron microscopy and magnetic measurement techniques in this paper.
用X射线衍射、扫描电镜和磁性测量等方法研究了Al的添加对Gd-Co合金的影响。
6) Gd alloys
Gd合金
补充资料：Am
分子式 C8H8O3
分子量 152.15
CAS号 611-72-3
扁桃酸为白色斜方片状结晶或结晶性粉末。有旋光异构体,见光分解变色。天然品为左旋扁桃酸,熔点130℃。消旋扁桃酸熔点为120-122℃。D204=1.300。6.3ml水或乙醇可溶解1g消旋扁桃酸。本品还可溶于乙醚、甲醇和异丙醇。
用途;扁桃酸主要可用于合成羟苄头孢菌素（AL-226）和环扁桃酸酯、阿托品类解痉药。
分子量 152.15
CAS号 611-72-3
扁桃酸为白色斜方片状结晶或结晶性粉末。有旋光异构体,见光分解变色。天然品为左旋扁桃酸,熔点130℃。消旋扁桃酸熔点为120-122℃。D204=1.300。6.3ml水或乙醇可溶解1g消旋扁桃酸。本品还可溶于乙醚、甲醇和异丙醇。
用途;扁桃酸主要可用于合成羟苄头孢菌素（AL-226）和环扁桃酸酯、阿托品类解痉药。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条