1) opening and closing transversely
横向开合
1.
When the movable scaffolding systems are applied to bridge construction,the core techniques include hydraulic pressure support and drop,opening and closing transversely as well as passing hole lengthways,which are the difficulty of construction,also the key of safety.
桥梁施工采用移动模架造桥机,其核心技术是液压顶落、横向开合和纵向过孔,这3个环节是施工技术的难点,也是安全生产的关键。
2) transverse crack
横向开裂
1.
This article briefly introduces production process flow and its main equipments of seamless ERW pipe of 20 steel,and analyzes cause of transverse crack occurred in production of seamless ERW pipe of 20 steel,and gives out the main measures to solve transverse crack.
分析了20钢无缝化ERW焊管在生产过程中产生焊缝横向开裂的原因,提出了解决横向开裂的主要措施。
2.
A numerical iteration method with one-dimension nonlinear mechanical modeling was (created) to analyze the transverse cracking of continuously reinforced concrete pavement subjected to (temperature) and drying shrinkage with consideration of the nonlinear bond slip between steel bar and (concrete) and the (nonlinear) friction slip between concrete slab and subgrade.
考虑钢筋与混凝土之间的非线性粘结滑移关系及混凝土面板与地基之间的非线性摩阻滑移关系,采用数值迭代法建立了连续配筋混凝土路面在温缩和干缩作用下横向开裂的一维非线性力学分析方法,从而同时获得裂缝间距、裂缝宽度与钢筋应力3个设计指标的结果,编制了迭代法计算程序CRCPAP。
3) transverse cracking
横向开裂
1.
Sensitivity analysis of transverse cracking for continuously reinforced concrete pavement;
连续配筋混凝土路面横向开裂的敏感性分析
2.
Development laws of transverse cracking for continuously reinforced concrete pavement;
连续配筋混凝土路面横向开裂发展规律
3.
Talreja for study of transverse cracking in composite materials, a more reasonable method for calculation of the restricted coefficients is introduced, and used for study of transverse cracking in composite laminated plates.
在Talreja提出的研究复合材料横向开裂的损伤力学方法的基础上,文中引进了一种更合理的计算约束系数的方法,并将其用于研究复合材料叠层板的横向开裂,预估了其弹性模量的变化。
4) horizontal spreading
横向展开
6) lateral mixing
横向混合
1.
Therefore, the dependence of penetration depth of the secondary air jet and the rate of gas lateral mixing on the s.
用气体示踪技术首次系统地研究了旋涡流化床悬浮空间内气流横向扩散与混合的基本规律,探讨了气流结构和形态对传质过程的影响,得出了二次风射流的穿透深度和气流横向混合速率对喷射角的强烈依赖关系,研究结果表明,旋涡流化床悬浮空间喷入二次风后氧浓度的径向分布与颗粒浓度分布的规律相吻合,满足了高浓度燃料区需要高氧量的燃烧要求。
补充资料：穿晶开裂
分子式：
CAS号：
性质：金属材料开裂的金属学特征之一。裂纹由晶粒内部穿过。延性断裂的断口微观特征一般为韧窝状，脆性断裂的特征为解理或准解理花样。
CAS号：
性质：金属材料开裂的金属学特征之一。裂纹由晶粒内部穿过。延性断裂的断口微观特征一般为韧窝状，脆性断裂的特征为解理或准解理花样。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条