3) bubble disintegration
![点击朗读](/dictall/images/read.gif)
细化气泡
4) super micro bubble
![点击朗读](/dictall/images/read.gif)
超微细气泡
5) micro-bubble
![点击朗读](/dictall/images/read.gif)
微气泡
1.
Research on an Oxygenated Water Purification System with Micro-bubble Generators;
![点击朗读](/dictall/images/read.gif)
微气泡生成与富氧净化系统研究
2.
Based on the analysis of the forces acting on a single rising micro-bubble,the equilibrium equation of the rising micro-bubble is derived,and the rising velocities of the bubbles with the radius of 40~350 μm are simulated.
在此基础上,利用带有显微摄像功能的粒子成像测速技术(P IV)装置对半径为20~320μm气泡的上浮速度进行了测量,通过对实验结果的统计,以及与仿真结果的比较分析可知,阻力系数变量与粘滞系数是影响气泡上浮速度的主要因素,它们的取值与上浮速度成反比,并得出了R e≤150条件下的微气泡运动通用的阻力系数表达式。
3.
The flow field surrounding the revolving object,pressure and resistance distribution on its wall were calculated in order to design a micro-bubble reducing resistance scheme for the revolving object.
通过数值计算方法,模拟回转体在水下的航行,分析回转体周围流场、压强及其壁面上阻力的分布,并根据计算结果为该回转体设计了有效的微气泡减阻方案。
6) microbubbles
![点击朗读](/dictall/images/read.gif)
微气泡
1.
Research on microbubbles generation by metal microporous tube;
![点击朗读](/dictall/images/read.gif)
金属微孔管制造微气泡的研究
2.
The calculated results show that microbubbles may reduce skin friction ma rkedly.
![点击朗读](/dictall/images/read.gif)
利用边界层中注入微气泡降低固体壁面摩擦阻力的方法是一项有实用价值且有待进一步研究的减阻技术。
3.
This paper mainly discussed about the research on microbubbles generation by metal microporous tube,it is a new method of bubble formation.
本文主要研究了用金属微孔管制造微气泡,这是一种比较新颖的气泡制造方法。
补充资料:染料细粉及超细粉
分子式:
CAS号:
性质:非水溶性染料或不易溶染料常采用的剂型。如分散染料、还原染料等对粒度及粒度分布均有一定要求,要求相对集中,过细、过粗,均对使用有不良影响。染料生产企业对本企业的产品均作了规定。这些染料产品一般多在2μm到上到4μm范围内,如对某些分散染料要求控制在1μm左右,分散性能4~5级,还原染料也与分散染料近似,故有超细粉之称。为使染料产品达到上述细度,常采用万能粉碎机或砂磨、球磨等进行粉碎。
CAS号:
性质:非水溶性染料或不易溶染料常采用的剂型。如分散染料、还原染料等对粒度及粒度分布均有一定要求,要求相对集中,过细、过粗,均对使用有不良影响。染料生产企业对本企业的产品均作了规定。这些染料产品一般多在2μm到上到4μm范围内,如对某些分散染料要求控制在1μm左右,分散性能4~5级,还原染料也与分散染料近似,故有超细粉之称。为使染料产品达到上述细度,常采用万能粉碎机或砂磨、球磨等进行粉碎。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条