1) Fast aggregation
快速凝聚
2) tachyon condensation
快子凝聚
1.
The forces are divergent for all cases when the brane-antibrane separation approaches to the string scale,signalling the occurrence of open string tachyon condensation in this regime.
对于膜-反膜相互作用力,一方面我们将Banks和Susskind的D0-(?)0情形推广到Dp-(?)p(1≤p≤8),我们发现当膜间距趋于弦尺度时对所有情形力都是发散的,暗示了快子凝聚的发生;另一方面我们考察了膜-反膜超引力构象的令人疑惑的静态性质,通过揭示在膜-反膜背景中一个放置在重合的膜-反膜位置的膜探针感受到的作用力为零,我们给出了超引力近似下一般静态膜-反膜构象存在性的直接证据。
3) rapid solidification
快速凝固
1.
Rapid Solidification of Cu-10Ag Alloy Droplets by Ultrasonic Arc Spray Atomization;
超音速电弧喷射雾化Cu-10Ag合金熔滴的快速凝固
2.
Carbide and its stability in FGH95 superalloy powders during rapid solidification;
快速凝固FGH95合金粉末中的碳化物及其稳定性
3.
Microstructure evolution of hypereutectic Al-Si alloy during rapid solidification;
过共晶Al-Si合金快速凝固组织演变
4) rapidly solidification
快速凝固
1.
Microstructure and property of Mg_(80)Cu_(15)Y_5 alloy by rapidly solidification and hot extrusion
热挤压快速凝固Mg_(80)Cu_(15)Y_5合金棒材的组织与性能
2.
The effects of rapidly solidification on the microstructure and the corrosion behavior of Mg-5Zn-1Y-0.
研究了快速凝固Mg-5Zn-1Y-0。
5) rapid solidification
快速冷凝
1.
This paper has analyzed the reasons of the brittleness of rapid solidification Al-Li alloys and introduced some main toughening methods in manufacturing,forming and heat treatment of the alloys.
通过对快速冷凝 (RS)Al-Li合金低塑韧性原因的分析 ,介绍了Al-Li合金制备、成材、热处理等过程中一些主要韧化途径 ,并简单讨论了获得较好综合性能的Al-Li合金制品的工艺方法及大致工艺参数范
2.
The microstructure and effect of grain refining of Al-Ti-B interalloy rods prepared by the process of rapid solidification-extrasion have been investigated by means of X-ray diffrac-tion，SEM and optical microscope in this paper.
借助Ｘ射线衍射、扫描电镜、金相显微技术等手段，对采用快速冷凝喷粉或离心制粒－挤压法制得的Ａｌ－Ｔｉ－Ｂ中间合金线杆的组织结构和其晶粒细化效果进行了研究。
3.
By means of rapid solidification,Al-Cu-Fe-Zn alloy powders were produced.
本文通过快速冷凝方法制得了Al-Cu-Fe-Zn系合金粉末。
6) melt spinning
快速凝固
1.
3～1) are prepared by means of vacuum arc melting followed by high temperature annealing and quenching or melt spinning method.
0)在常规熔铸、高温退火+淬火及快速凝固不同制备条件下的组织结构和电化学性能。
2.
4 were prepared using conventional cast, rapid solidification (melt spinning) and annealing processes.
4 在常规熔铸、快速凝固、退火处理不同制备条件下的组织结构和电化学性能。
补充资料：快速
速度快的；迅速：～照相机ㄧ～炼钢ㄧ～行军 ㄧ～育肥。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条