1) DLS double layers switch
叠层交换
2) crossply
[英]['krɔsplai] [美]['krɔs,plaɪ]
交叉叠层
1.
Introduction one kind of non woven technology, unidirection fiber layer machine, continiou crossply and laminated technology and equipments.
介绍了一种先进的不织布技术,单向纤维定向层及其成型机、连续交叉叠层复合技术及其设备。
3) cross_ply laminate
正交叠层
1.
On the basis of the shear_lag theory,this paper studies the microstress redistributions induced by the interaction of failure of 90° layers and the breakage of some fibers in 0° layer in cross_ply laminates under tension in 0° direction.
基于剪滞理论，研究了在０°方向承受拉伸的复合材料正交叠层板由９０°层的破坏及０°层中部分纤维断裂相互作用所导致的细观应力重新分布。
4) alternate multilayer
交互叠层
1.
By introducing an alternate multilayer of 4, 4′ bis[N (p tolyl) N phenyl amino]biphenyl (TPD) /1,3,5 tris (3 methylphenylphenylamino) triphenylamine ( m MTDATA) as hole transporting layer which can confines the surplus holes injected from th.
通过引入交互叠层的TPD m MTDATA作为空穴传输层 ,与传统异质结器件相比 ,最大发光效率及最大发光亮度都有明显提高。
5) prestack layer replacement
叠前层替换
6) cross-ply laminate
正交叠层板
1.
The transverse initial cracking of the cross-ply laminates in 90° ply by the action of the tensile loads in 0° ply direction was studied by establishing a layering shear-lag model conjunct with the linear elastic fracture mechanics.
建立一种分层剪滞模型 ,并结合线弹性断裂力学 ,研究了正交叠层板在受到沿 0°层方向的拉伸荷载作用下 ,90°层中产生横向基体开裂的破坏问题 。
2.
The transverse initial-failure in cross-ply laminates loaded in 0 degree fiber direction is first studied using the shear-lag model of finite sub-layers and incorporating the linear elastic fracture mechanics.
采用有限子层剪滞模型,并结合线弹性断裂力学,首先研究了正交叠层板在受到沿0o层方向的拉伸荷载作用下,90o层中产生横向初始开裂问题。
补充资料：层岩叠壑图
中国画。清代髡残作。纸本立轴。浅设色。画面景物繁复。上方左角大江浩淼，帆影依稀；右角山峰高峻，瀑流奔壑，山径左曲，至中幅复右折。近景绿树掩映，茅屋临溪。笔法苍秀醇厚，有雄奇磊落之致。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条