1) instantaneous shear rate
瞬时剪切速率
2) shear rate
剪切速率
1.
Study on relationship of viscosity and shear rate of potato starch size;
马铃薯淀粉浆料的粘度与剪切速率关系的研究
2.
Experimental investigation of the apparent viscosity and the shear rate of gelled propellant in straight round pipe;
凝胶推进剂直圆管中剪切速率与表观粘性实验研究
3.
Impact of shear rate on microstructure of PA 6/PP blends
剪切速率对PA 6/PP共混物微观结构的影响
3) shearing rate
剪切速率
1.
The experimental results show that the apparent viscosity of semi-solid A356 alloy increases with increasing the fraction solid, but decreases with increasing the shearing rate in the steady-state.
结果表明：半固态A356合金的稳态表观粘度(η_a)随着固相分数(f_s)的增加而增加,但随剪切速率(γ)的增大而减小,当f_s达到某一临界值之后,η_a迅速增加,可用方程η_a=2。
2.
The influence of molecular weight, shearing rate and temperature on the rheologic behavior of domestically manufacturing linear PPS (i.
以国产线性聚苯硫醚树脂为原料,研究了分子质量、剪切速率、温度对PPS树脂流变行为的影响。
3.
The diameter, flow, shearing rate ,draw ratio and pressure difference were calculated.
讨论了"┃·"异形喷丝板的设计、纺丝工艺及后加工工艺,计算出喷丝板毛细孔的当量直径、单孔流量、剪切速率、喷丝头拉伸比,验证了喷丝孔的结构参数是影响可纺性的关键因素。
4) Instantraneous rate
瞬时速率
5) specific shear rate
高速率剪切
1.
The shear rate and temperature of the fluid in the wellbore and fracture is different,the depth of wellbore and the length of time that the fluid withstands specific shear rate are important to its final viscosity.
液体在井筒和裂缝中的剪切速率与温度都是不同的,液体经历高速率剪切的时间长短不同,对液体的最终粘度造成的影响也不同,室内实验应考虑到井筒中高速率剪切对压裂液粘度的影响,模拟现场不同施工阶段进行液体性能评价,以便更真实地预测施工过程中液体粘度的变化,使液体满足现场施工要求。
补充资料：瞬时
1.霎时;立刻。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条