说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 气动声学性能
1)  aeroacoustic performance
气动声学性能
1.
Effect of circumferential forward-skewed blade on aeroacoustic performance of axial fan
周向前弯叶片对轴流风扇气动声学性能影响
2)  aerodynamic-aeroacoustic performance
气动-声学性能
1.
The experiments of aerodynamic-aeroacoustic performance in axial fans in non-self-stimulated and self-stimulated domain are carried out.
本文通过对非自模化和自模化区域内的两组轴流动叶试验风机的气动-声学性能的实验研究,得到了非自模化和自模化区域内的气动-声学相似性。
3)  aeroacoustics [,ɛərəuə'ku:stiks]
气动声学
1.
Numerical Simulation Study about Aeroacoustics in Shear Flows;
剪切流中气动声学的数值模拟研究
2.
Three-dimensional(3D)unsteady compressible flow over an open cavity and the relevant aeroacoustics are studied using a hybrid LES-acoustic analogy method.
使用大涡模拟-声学比拟相结合的方法,研究三维开式空腔的非定常可压缩过流及其相关的气动声学问题。
3.
This scaling law points out that similar propellers in aeroacoustics must satisfy three conditions: equal advanced ratio; equal Mach number; Reynolds number of propeller is higher than critical number.
从气动方程和声学方程两方面共同考虑,结合螺旋桨气动声学风洞实验研究的特点,推导出几何相似螺旋桨风洞实验中应模拟的相似参数。
4)  aerodynamic performance
空气动力学性能
1.
Based on the models,the dynamic current collection and aerodynamic performances of the pantograph were studied using MSC-Marc and STAR-CD simulation software.
建立了接触网和受电弓子系统的有限元模型和空气动力学模型,采用MSC-Marc及STAR-CD软件,研究受电弓动态受流性能和空气动力学性能。
5)  acoustic performance
声学性能
1.
Application of FMBEM to predict silencer acoustic performance;
快速多极边界元法应用于预测消声器的声学性能(英文)
2.
Analysis of Acoustic Performance of the Resonant Silencer;
共振式消声器声学性能分析
3.
Finite Element Analysis of Acoustic Performance of Reactive Muffler;
抗性消声器声学性能的有限元分析
6)  acoustical properties
声学性能
1.
Mechanical properties, fluid permeability, acoustical properties, heat conductivity and damping capacity were tested by testing methods and testing units that we design.
研究渗流铸造泡沫铝合金的性能特点,自行设计测试方法和制造测试装置,测试了泡沫铝合金的力学性能、流体透过性能、声学性能、热传导性能和阻尼性能。
补充资料:不锈钢的物理性能、力学性能和耐热性能
不锈钢的物理性能


不锈钢和碳钢的物理性能数据对比,碳钢的密度略高于铁素体和马氏体型不锈钢,而略低于奥氏体型不锈钢;电阻率按碳钢、铁素体型、马氏体型和奥氏体型不锈钢排序递增;线膨胀系数大小的排序也类似,奥氏体型不锈钢最高而碳钢最小;碳钢、铁素体型和马氏体型不锈钢有磁性,奥氏体型不锈钢无磁性,但其冷加工硬化生成成氏体相变时将会产生磁性,可用热处理方法来消除这种马氏体组织而恢复其无磁性。

奥氏体型不锈钢与碳钢相比,具有下列特点:

1)高的电阴率,约为碳钢的5倍。

2)大的线膨胀系数,比碳钢大40%,并随着温度的升高,线膨胀系数的数值也相应地提高。

3)低的热导率,约为碳钢的1/3。

不锈钢的力学性

不论不锈钢板还是耐热钢板,奥氏体型的钢板的综合性能最好,既有足够的强度,又有极好的塑性同时硬度也不高,这也是它们被广泛采用的原因之一。奥氏体型不锈钢同绝大多数的其它金属材料相似,其抗拉强度、屈服强度和硬度,随着温度的降低而提高;塑性则随着温度降低而减小。其抗拉强度在温度15~80°C范围内增长是较为均匀的。更重要的是:随着温度的降低,其冲击韧度减少缓慢,并不存在脆性转变温度。所以不锈钢在低温时能保持足够的塑性和韧性。

不锈钢的耐热性能

耐热性能是指高温下,既有抗氧化或耐气体介质腐蚀的性能即热稳定性,同时在高温时双有足够的强度即热强性。

不锈钢国际标准标准

标准 标准名


GB 中华人民共和国国家标准(国家技术监督局)

KS 韩国工业标准协会规格Korean Standard

AISI 美国钢铁协会规格America Iron and Steel Institute

SAE 美国汽车技术者协会规格Society of Automative Engineers

ASTM 美国材料试验协会规格American Society for Testing and Material

AWS 美国焊接协会规格American Welding Society

ASME 美国机械技术者协会规格American Society of Mechanical Engineers

BS 英国标准规格British Standard

DIN 德国标准规格Deutsch Industria Normen

CAS 加拿大标准规格Canadian Standard Associatoin

API 美国石油协会规格American Petroleum Association

KR 韩国船舶协会规格Korean Resister of Shipping

NK 日本省事协会规格Hihon Kanji Koki

LR 英国船舶协会规格Llouds Register of Shipping
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条