说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 600MW机组节能改造
1)  600 MW unit energy-saving reformation
600MW机组节能改造
2)  energy conservation reform of generator units
机组节能改造
3)  600 MW unit
600MW机组
1.
Optimization of dry ash removal system design scheme for a 600 MW unit in thermal power plant
火力发电厂600MW机组干除灰系统设计方案优化
2.
The flue gas desulfuration technology by firstly using spray bubbling tower on 600 MW unit in our country has been pressented, and the technical process and operational parameters of the said technology being analysed.
介绍了国内首台应用在600MW机组的喷射鼓泡塔烟气脱硫(FGD)技术,并对该技术的工艺和运行参数进行了分析。
3.
Owing to the three-bearing support mode for the generator and collector ring rotors of a 600 MW unit,the terminal bearing bush is liable to vibration.
由于600MW机组的发电机和集电环转子采用三轴瓦支撑方式,所以其末端轴瓦容易发生振动问题。
4)  600 MW power unit
600MW机组
1.
Main factors affecting the power consumption rate of wet FGD equipment for 600 MW power unit;
影响600MW机组湿法烟气脱硫装置厂用电率主要因素分析
2.
The Limestone-Gypsum wet FGD systems are utilized too much on 600 MW power units in China,for this,the feasibility to adopt the SDA FGD process on 600 MW power units in North China and Inner Mongolia where the middle-and-low-sulfur coal is burned.
针对我国目前600MW机组采用湿式石灰石-石膏法烟气脱硫工艺比例过高的情况,提出了在北方及内蒙古中、低硫煤地区600 MW机组采用旋转喷雾干燥法烟气脱硫工艺的可行性,通过对该技术工艺原理、在国外的技术应用研究及与湿式石灰石-石膏法烟气脱硫工艺技术经济性比较,说明了该工艺在欧美已经成为应用在大型机组的成熟工艺,同时对该工艺在我国作为600 MW机组烟气脱硫的主要工艺未来的使用进行了论证,研究结论将对我国未来火电厂烟气脱硫工艺的多元化技术发展起到促进作用。
5)  600MW unit
600MW机组
1.
The whole process of water vapor pump analysis of 600MW unit
600MW机组汽泵全过程给水分析
2.
Liaocheng power plant s 600MW unit can t perform the switching operation from governing valve mode to sequence valve mode,which has long been a problem and affected the unit efficiency apparently.
聊城电厂600MW机组投产以来一直存在调节阀无法切顺序阀运行问题,对机组的效率影响较大。
3.
The design and debugging situation of thermal control system for homemade supercritical 600MW units in Huaneng Qinbei power plant has been presented.
介绍了华能沁北电厂国产超临界600MW机组热控系统设计与调试情况,对存在的问题进行了改进,改进后系统工作正常,效果较好。
6)  energy-saving reform
节能改造
1.
Effect factors on energy-saving reform of construction;
影响既有建筑节能改造的因素
2.
The application and analysis of conversion technique about the pump and fans in energy-saving reform;
变频技术在泵与风机节能改造中的应用分析
3.
The energy-saving reform of injection moulding system was accomplished using frequency inverter.
运用变频器对注塑机进行节能改造设计,采用比例流量、比例压力信号动态控制变频器的输出频率,从而控制油泵电机的转速,实现变压节能。
补充资料:[3-(aminosulfonyl)-4-chloro-N-(2.3-dihydro-2-methyl-1H-indol-1-yl)benzamide]
分子式:C16H16ClN3O3S
分子量:365.5
CAS号:26807-65-8

性质:暂无

制备方法:暂无

用途:用于轻、中度原发性高血压。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条