说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 热工性能验算
1)  thermal performance checking
热工性能验算
1.
The structure,characteristics,performance indexs,construction technology and thermal performance checking of this system were summarized.
以山东省某大学住宅楼为例,概述了此外墙外保温系统的构造、特点、性能指标、施工工艺及热工性能验算等。
2)  thermal performance test
热工性能试验
3)  performance calculation
性能验算
1.
The performance calculation and analysis to demonstrate its reasonability and validity were carried out.
提出基于飞机传统部件设计参数的广义参数概念,描述未来飞行器概念外形,并通过初步的性能验算公式体系验证其合理、有效性。
4)  thermal performance
热工性能
1.
Analysis and improvement on concrete hollow block thermal performance;
空心砌块热工性能分析和节能改善优化
2.
Analysis and improvement of thermal performance of light aggregate concrete hollow block;
轻集料混凝土空心砌块热工性能的分析及改善
3.
Simulation of cavities influence on thermal performance of plastic profiles;
腔室对塑料型材热工性能影响的模拟
5)  thermal property
热工性能
1.
Review on present status and thermal property of dry process cement kiln in Guangxi;
广西干法水泥窑的现状及热工性能的评述
2.
Study on the thermal property experiment system for refrigerated containers;
新型冷冻集装箱热工性能实验系统研究
3.
Testing and analysis on thermal property for electric energy storage projects in Beijing
北京市蓄能用电工程热工性能测试与分析
6)  thermodynamic performance
热工性能
1.
Experimental study on thermodynamic performances of UPVC heating floor;
硬聚氯乙烯供暖地板热工性能的实验研究
2.
Demonstrates the main points of energy saving from the aspects of natural lighting analysis,shading design,thermodynamic performance of building envelopes,natural ventilation research and energy consumption analysis,which provide a reliable basis for the energy saving design of terminal buildings.
从自然采光分析、遮阳设计、围护结构热工性能、自然通风研究、能耗分析等多角度阐述了航站楼建筑节能的要点,为航站楼节能设计提供了科学依据。
3.
The composition of hardware and software systems for a reconstructed experiment table for thermodynamic performance of radiator is introduced,and the experimental flow of thermodynamic performance of radiator is discussed.
介绍了某散热器热工性能实验台改造后的硬件、软件系统的组成,探讨了散热器热工性能实验的实验流程。
补充资料:不锈钢的物理性能、力学性能和耐热性能
不锈钢的物理性能


不锈钢和碳钢的物理性能数据对比,碳钢的密度略高于铁素体和马氏体型不锈钢,而略低于奥氏体型不锈钢;电阻率按碳钢、铁素体型、马氏体型和奥氏体型不锈钢排序递增;线膨胀系数大小的排序也类似,奥氏体型不锈钢最高而碳钢最小;碳钢、铁素体型和马氏体型不锈钢有磁性,奥氏体型不锈钢无磁性,但其冷加工硬化生成成氏体相变时将会产生磁性,可用热处理方法来消除这种马氏体组织而恢复其无磁性。

奥氏体型不锈钢与碳钢相比,具有下列特点:

1)高的电阴率,约为碳钢的5倍。

2)大的线膨胀系数,比碳钢大40%,并随着温度的升高,线膨胀系数的数值也相应地提高。

3)低的热导率,约为碳钢的1/3。

不锈钢的力学性

不论不锈钢板还是耐热钢板,奥氏体型的钢板的综合性能最好,既有足够的强度,又有极好的塑性同时硬度也不高,这也是它们被广泛采用的原因之一。奥氏体型不锈钢同绝大多数的其它金属材料相似,其抗拉强度、屈服强度和硬度,随着温度的降低而提高;塑性则随着温度降低而减小。其抗拉强度在温度15~80°C范围内增长是较为均匀的。更重要的是:随着温度的降低,其冲击韧度减少缓慢,并不存在脆性转变温度。所以不锈钢在低温时能保持足够的塑性和韧性。

不锈钢的耐热性能

耐热性能是指高温下,既有抗氧化或耐气体介质腐蚀的性能即热稳定性,同时在高温时双有足够的强度即热强性。

不锈钢国际标准标准

标准 标准名


GB 中华人民共和国国家标准(国家技术监督局)

KS 韩国工业标准协会规格Korean Standard

AISI 美国钢铁协会规格America Iron and Steel Institute

SAE 美国汽车技术者协会规格Society of Automative Engineers

ASTM 美国材料试验协会规格American Society for Testing and Material

AWS 美国焊接协会规格American Welding Society

ASME 美国机械技术者协会规格American Society of Mechanical Engineers

BS 英国标准规格British Standard

DIN 德国标准规格Deutsch Industria Normen

CAS 加拿大标准规格Canadian Standard Associatoin

API 美国石油协会规格American Petroleum Association

KR 韩国船舶协会规格Korean Resister of Shipping

NK 日本省事协会规格Hihon Kanji Koki

LR 英国船舶协会规格Llouds Register of Shipping
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条