说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 钨极氩弧熔钎焊
1)  TIG welding-brazing
钨极氩弧熔钎焊
1.
Characteristics of precoating TIG welding-brazing joint of aluminum alloy to stainless steel
铝合金/不锈钢预涂层钨极氩弧熔钎焊接头的特性
2)  tungsten inert gas welding-brazing
钨极氩弧熔-钎焊
3)  TIG welding
钨极氩弧焊
1.
Three-dimensional dynamic simulation of temperature field of TIG welding and infrared temperature measurement;
钨极氩弧焊温度场三维动态模拟及红外测温
2.
TIG welding with argon shielding on the back of the weld metal and super-low carbon austenitic stainless steel welding wire is used to weld first layer of weld seam of 20/0Cr18Ni9 clad pipe.
采用背部充氩保护的钨极氩弧焊(TIG)和超低碳奥氏体不锈钢焊丝TGS - 30 9L焊接 2 0 / 0Cr1 8Ni9复合管的第 1层焊缝 ,焊后利用金相显微镜、扫描电子显微镜和电化学分析方法对焊接接头的化学成分、金相组织、显微硬度以及抗腐蚀性能进行了研究。
3.
TIG welding process with TGS-309L super-low carbon austenitic stainless steel welding wire is used on the transitional layer of the weld of20/0Cr18Ni9compound pipes.
研究了珠光体钢和奥氏体不锈钢复合管钨极氩弧焊(TIG)接头的性能。
4)  TIG [英][tɪɡ]  [美][tɪg]
钨极氩弧焊
1.
APPLICATION OF FLUX - CORED WIRE TO TIG OF STAINLESS STEEL;
不锈钢钨极氩弧焊药芯焊丝的应用
2.
A Study on the Technology of TIG Welding the Alloys Based on Zn;
锌基合金钨极氩弧焊焊接工艺的研究
3.
Microstructure and Properties of TIG Welded Joint of Hot Rolled 410S Stainless Steel Plates
热轧410S不锈钢板材钨极氩弧焊焊接接头的组织与性能
5)  gas tungsten arc welding
钨极氩弧焊
1.
Role of heat sink in gas tungsten arc welding with trailing spot heat sink for titanium alloy;
钛合金带热沉钨极氩弧焊中热沉作用
2.
The results indicate that a Mg/Al joint with excellent microstructure performance can be achieved by gas tungsten arc welding and the microstructure in the weld metal is fine.
采用扫描电镜(SEM)、电子探针(EPMA)和X射线衍射(XRD)等测试方法,对用脉冲钨极氩弧焊(EMP-TIG)获得的Mg/Al异种材料焊接接头区的组织结构进行了研究。
6)  GTAW
钨极氩弧焊
1.
The simulated results of the temperature field of stainless steel SUS310 in GTAW process showed that pre-data-treatment and post-data-treatment of MARC are more powerful than those of PHOENICS,so it is easy for users to input the boundary conditions and get the results in MARC.
通过应用这两种软件对SUS310不锈钢钨极氩弧焊(GTAW)过程温度场模拟发现,两种软件的前后处理过程存在着明显的差异。
2.
In order to optimize the welding procedure of stainless steel,improve the welding quality and reduce the welding defect,the longitudinal magnetic field was introduced during the welding of austenitic stainless steel with GTAW.
为了优化不锈钢焊接工艺,提高焊接质量,减少不锈钢焊接缺陷,在对奥氏体不锈钢进行钨极氩弧焊时外加纵向磁场,焊后对焊接试样进行弯曲和拉伸试验,并采用电子显微镜对焊接接头进行显微组织分析。
补充资料:氩弧焊


氩弧焊
argon-arc welding

  yohuhan盆弧焊(argon一are welding)用氢气作保护气体的气体保护电弧坪。
  
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条