1) stay bearing width
支撑宽度
1.
The effect of stay bearing width on the vibration characteristics of ring-type ultrasonic motor was focused on.
主要分析定子支撑宽度对定子振动特性的影响,并得出:直径100mm环形行波型超声波电动机的支撑宽度以9mm和4mm为宜。
2) propped fracture width
支撑缝宽
3) supporting degree
支撑度
4) support stiffness
支撑刚度
1.
For analyzing and enhancing dynamics performance of high-speed spindle of NC winding machine,based on finite element method,using ANSYS,the dynamics performance of the high-speed spindle of SKR-4DQ NC winding machine was analyzed,while taking support stiffness and spindle parts into account.
为了分析并提高数控绕线机高速主轴单元的动态性能,以转子动力学有限元理论为基础,以ANSYS有限元分析软件为平台,在考虑支撑刚度和轴系零件的情况下,对SKR-4DQ型全自动数控绕线机主轴单元进行了动力学分析,得出了在不同的支撑刚度下,其高速主轴单元的前3阶振型和固有频率;分析了不同的支撑刚度对主轴固有频率的影响。
2.
The relationship of ultimate capacity and support stiffness is analyzed and discussed deeply.
对于设置了支撑的框架结构 ,并且各柱的u(u =kl)不全相等时的稳定性问题进行了研究 ;对临界荷载和支撑刚度的关系进行了深入分析和探讨 ;分析了荷载不对称的影响。
5) brace stiffness
支撑刚度
1.
The influence on the reducing seismic performance of the structure is compared and analyzed when the steel brace choose the different brace stiffness.
结合工程实例,对多层钢筋混凝土框架结构进行了分析,考虑非线性粘滞阻尼器斜撑的施加对结构地震反应的影响,并根据计算结果研究了支撑刚度对阻尼器减震效果的影响,所得结果可为粘滞阻尼器支撑结构的设计提供依据。
2.
Based on the control loss factor of viscoelastic damper,the reasonable value range of brace stiffness is put forward.
粘弹性阻尼器以支撑型式安装在结构上,支撑刚度大小直接影响到阻尼器的消能效果,从阻尼器损耗因子的角度出发,推导了支撑刚度应满足的条件,给出了合理的取值范围。
3.
The method has been used to investigate the influences of the brace stiffness and the viscous dampers parameters on vibration reduction effects.
利用本方法研究了支撑刚度及阻尼器参数对非线性粘滞阻尼器减振效果的影响。
6) support length
支撑长度
1.
It is known that such properties as short support length, high order vanishing moments, linear phase, high regularity are desirable and critical properties in signal processing.
本论文研究了提升格式与初始滤波器,以及它与提升生成的新滤波器支撑长度、消失矩、线性相位、正则性等性质的关系,给出了提升格式构造同时满足短支撑、任意阶消失矩、线性相位和高正则性小波滤波器的一般算法框架。
2.
This paper investigates central properties such as support length,linear phase,vanishing moments of wavelet filters within the lifting scheme framework.
文章系统研究了提升格式与小波滤波器支撑长度、线性相位、消失矩等性质的关系;提出了提升格式构造同时满足短支撑、对称性和任意阶消失矩双正交小波的一般算法;给出了最佳提升格式(Best Lifting Scheme,BLS)的定义以及在该算法下诸多已有双正交小波的构造方法。
补充资料：支撑
①抵住使不倒下：东面的墙已经倾斜，用一根大木支撑着。②支持住局面使不崩溃；勉强地维持：支撑局面｜支撑门户｜独力支撑｜看他还能支撑多久。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条