1) HR 2 stainless steel
HR-2不锈钢
1.
In the electroplating process,aluminum deposition from AlCl_3/EMIC to the surface of HR 2 stainless steel was performed with a deposition rate of 15μm/h at 25℃under the protection of argon gas.
为避免制备温度过高引起基体性能退化,采用了室温熔盐电镀与热处理复合技术在HR-2不锈钢上进行了渗Al涂层制备研究,并对涂层的形貌、结构和成分进行了表征。
2) HR-2 stainless steel
HR-2抗氢不锈钢
3) HR-1 stainless steel
HR-1不锈钢
1.
Cu is used as the mesosphere material in the experiment, and the diffusion-bonding experiment of Be/Cu/HR-1 stainless steel is made on the Greeble1500 hot stimulation test-machine.
以Cu为中间层材料,采用Greeble1500热模拟试验机对Be/HR-1不锈钢进行扩散连接试验,利用PMEOlympusTokyo光学显微镜、扫描电镜(SEM)、显微硬度计(HV-1000)、X射线衍射仪研究分析了其界面特性。
4) HR-2 steel
HR-2钢
1.
Diffusion bonding processes and its joint properties of aluminum-silicon(Al-Si)alloy to HR-2 steel by hot isostatic pressing were studied in this paper.
采用热等静压直接扩散连接方法对Al-Si合金/HR-2钢进行了研究。
5) XX-2 stainless steel
XX-2不锈钢
1.
Fuzzy orthogonal optimization for the cut parameter of XX-2 stainless steel;
XX-2不锈钢切削参数模糊正交优化
6) stainless steel
不锈钢
1.
Vacuum hot roll bonding of TC4 titanium alloy and 0Cr18Ni10Ti stainless steel;
TC4钛合金与0Cr18Ni10Ti不锈钢真空热轧连接
2.
Research on cyclic ion nitriding technology catalyzed by rare earth for 2Cr13 stainless steel;
2Cr13不锈钢的稀土催渗循环离子渗氮工艺研究
3.
Analysis of the components of acid chemical coloring solutions for stainless steel;
不锈钢酸性化学着色液成分的分析方法
补充资料：[3-(aminosulfonyl)-4-chloro-N-(2.3-dihydro-2-methyl-1H-indol-1-yl)benzamide]
分子式：C16H16ClN3O3S
分子量：365.5
CAS号：26807-65-8
性质：暂无
制备方法：暂无
用途：用于轻、中度原发性高血压。
分子量：365.5
CAS号：26807-65-8
性质：暂无
制备方法：暂无
用途：用于轻、中度原发性高血压。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条