2) adaptive peak
适应峰
3) adaptive peak
适应高峰
4) peak stress
峰值应力
1.
In order to research on correlative functions of peak stress and deformation stored energy with Zener-Hollomon parameter,the elevated temperature tensile test of 45 steel was carried out at Gleeble-1500D thermal-mechanical simulator,in the range of deformation temperature 1123-1273K and initial strain rate 0.
01~5s-1,并采用双曲正弦模型,研究了45钢在高温拉伸条件下的峰值应力、变形储能与Zener-Hollomon参数的关系函数。
2.
The model of thermal deformation and the relationship of peak stress,peak strain and Z were obtained that provide basic data for prediction and control of microstructure and properties of tested steel products.
975 kJ/mol,并建立了试验钢动态再结晶热变形模型和峰值应力、峰值应变与Z因子的关系,为预报和控制该钢的组织和性能提供了基本依据。
3.
The activation energy of deformation was calculated and the relationship among peak stress and deformation temperature and strain rate was established.
实测了高温下应力-应变关系曲线,观察了变形后的显微组织,计算了材料的激活能,并建立了峰值应力与变形温度和应变速率的关系。
5) peak strain
峰值应变
1.
Influence of the contents of C,Mn,Si on the peak strain of deformed austenite;
C、Mn、Si含量对变形奥氏体峰值应变的影响
2.
The model of thermal deformation and the relationship of peak stress,peak strain and Z were obtained that provide basic data for prediction and control of microstructure and properties of tested steel products.
975 kJ/mol,并建立了试验钢动态再结晶热变形模型和峰值应力、峰值应变与Z因子的关系,为预报和控制该钢的组织和性能提供了基本依据。
3.
The scopes of this study include apparent shape,peak stress,peak strain,modulus of elasticity,Poisson′s ratio and stress-strain curve of sandstone.
对焦作砂岩在常温及经历100℃～1 200℃温度作用后的力学特性进行试验研究,详细分析加温后砂岩的表观形态、峰值应力、峰值应变、弹性模量、泊松比以及应力–应变全过程曲线等的变化情况,并对砂岩的高温劣化机制作初步探讨。
6) Peak effect
峰值效应
1.
It follows that the system is in a sub-stable state as a result of the competition between ordered and disordered interactions,which results in peak effects of the critical current.
由于在涡旋玻璃相中,电流驱动下的噪声值表现出一个峰,表明系统处于无序与有序相互竞争的亚稳态,并且临界电流应有峰值效应。
补充资料：轧辊残余应力(见轧辊应力)
轧辊残余应力(见轧辊应力)
residual stresses in roll
zhagun eanyu yingli轧辊残余应力(residual stresses in roll)见礼辐应力。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条