2) short-leg shear wall
短肢剪力墙
1.
On application of short-leg shear wall structure in residence(house)design;
浅谈短肢剪力墙结构在住宅设计中的应用
2.
A wall element macro-model of T-shaped short-leg shear wall;
一种T形短肢剪力墙的墙元宏模型
3.
A new computation method for short-leg shear wall;
短肢剪力墙的一种新计算方法
3) short shear wall
短肢剪力墙
1.
A study of vertically-loaded local transfer RC joint from inclined column to framed short shear wall;
竖向荷载作用下钢筋混凝土斜柱—短肢剪力墙局部转换节点的试验研究
2.
Based on actual engineering,construction method of large steel formwork for short shear wall is introduced in this paper,which is assembled by small steel formwork.
结合工程实践,介绍了小钢模拼装成大模板用于短肢剪力墙的施工方法。
3.
This article presents its designing features from the definition of short shear wall,the definition of multi-short-shear-wall structure and failures exist in the present structural computation software; it also provides gist in the design of short shear wall in a project.
短肢剪力墙结构是目前高层住宅建筑设计中较为常见的结构形式。
4) short-pier shear wall
短肢剪力墙
1.
About the short-pier shear wall structure design;
浅谈短肢剪力墙结构的设计
2.
Discussion on short-pier shear wall in multi-story residential buildings;
短肢剪力墙结构体系在多层住宅中的探讨
3.
Analysis and discussion on special-shaped column and short-pier shear wall;
异形柱与短肢剪力墙分析探讨
5) short pier shear wall
短肢剪力墙
1.
Analyses on Shear Capacity of Short Pier Shear Wall Structures;
短肢剪力墙的抗剪性能分析
2.
Application of plastering-free technique in short pier shear wall
免抹灰技术在短肢剪力墙结构中的应用
3.
By experiment of the beam bars in exterior short pier shear wall joints,the anchorage performance of the beam bars in joints on the action of low cyclic load have been studied to attest if the beam bars in exterior short pier shear wall joints can sufficed with the demanding of anchorage intensity and anchorage rigidity,when the anchorage of beam bars satisfy the requirement of the code.
通过四个T型短肢剪力墙中间层端节点试件的试验,研究低周反复荷载作用下梁筋在节点区的锚固性能,验证了短肢剪力墙结构墙梁端节点处,在梁筋满足规范直线锚固长度的条件下,采用水平直线锚固方式能够满足锚固强度和锚固刚度要求。
6) short column shear wall
短肢剪力墙
1.
Forces analysis on the short column shear wall and special-shaped column of high-rise building;
高层建筑短肢剪力墙与异形柱结构受力分析
2.
Conceptual design of short column shear wall of high-rise building;
高层住宅短肢剪力墙结构的概念设计
3.
Research on mechanical behaviors of short column shear wall and special-shaped column;
短肢剪力墙和异形柱结构受力分析与设计探讨
补充资料：型钢
分子式：
CAS号：
性质：长度和截面周长之比相当大的直径钢材，有时也包括不属于板材、管材和线材的金属塑性加工制品。按生产方法分为热轧型钢、弯曲型钢、挤压型钢、拔制型钢和焊接型钢等。其中热轧型钢具有生产规模大，效率高，能相少和成本低等优点，是型钢生产的主要方法。型钢的断面形状支为简单、复杂和周期三类。简单断面型钢指方钢、圆钢、扁钢、户钢、六角钢等。复杂断面型钢指工字钢、槽钢、钢轨、窗框钢等周期断面型钢指螺纹钢、各种轴件、犁铧钢等。
CAS号：
性质：长度和截面周长之比相当大的直径钢材，有时也包括不属于板材、管材和线材的金属塑性加工制品。按生产方法分为热轧型钢、弯曲型钢、挤压型钢、拔制型钢和焊接型钢等。其中热轧型钢具有生产规模大，效率高，能相少和成本低等优点，是型钢生产的主要方法。型钢的断面形状支为简单、复杂和周期三类。简单断面型钢指方钢、圆钢、扁钢、户钢、六角钢等。复杂断面型钢指工字钢、槽钢、钢轨、窗框钢等周期断面型钢指螺纹钢、各种轴件、犁铧钢等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条