1) waste gas of sinter machine discharge end
烧结机尾烟气
2) sintering waste gas
烧结烟气
1.
As a result, the dense flow absorber process was selected to treat the sintering waste gas.
根据石家庄钢铁股份有限责任公司烧结机机头烟尘特点,对几种不同的处理方法进行比较,提出了采用密相干塔烟气脱硫的方案,来进行烧结烟气脱硫。
2.
In the near future the technologies for simultaneous desulfurzation and denitrition technologies of sintering waste gas will become a big hot point in the fields of waste gas desulfurization and denitrification at home and abroad.
鉴于烧结烟气的脱硫脱硝技术是目前国内外脱硫脱硝研究的一大热点,介绍了典型的可用于烧结烟气脱硫脱硝技术以及目前国内外新兴的烟气同时脱硫脱硝技术,并对各种技术的优缺点进行了分析。
3.
3 sintering plant were introduced in detail,which can be used as reference for sintering waste gas desulphurization.
本文详细介绍了NID脱硫工艺的原理、主要设备、工艺流程、技术特点及在三烧的应用情况,以期为烧结烟气脱硫提供参考。
3) sintering gas
烧结烟气
1.
By choosing CFBA system as test platform,particles which were suitable for desulfurization reaction of fluidized sintering gas were selected through changing the process of spray humidification,while existing alkaline raw materials and alkaline wastes were made full use of in steel enterprises.
以CFBA工艺为测试平台,充分利用钢铁企业现有的碱性原料和碱性废物,通过喷雾增湿过程,展开适于烧结烟气流态化脱硫反应的粒子选择研究,研究结果表明:99。
2.
For desulphurization of sintering gas,a pilot dense flow absorber was built and desulphurization experiment was carried out.
为进行烧结烟气的脱硫处理,建立了密相干塔烟气脱硫新技术的试验装置,并进行了脱硫试验研究。
3.
It is a highly efficient sintering gas desulphurization technology which features in stable operation and small investment.
通过对国内外烧结烟气进行分析,对动力波脱硫技术不断改进和完善,开发出了动力波烧结尾气脱硫技术。
4) ore sintering flue gas
烧结烟气
1.
The research of desulfurization reagent optimum burden made by lime and pulverized coal ash on the ore sintering flue gas;
活性石灰/粉煤灰制备烧结烟气脱硫剂配比试验研究
2.
A research was carried out on the desulfurization reagent made by lime that is common used in steel corporation and sinter ash produced by steel corporation's procreant scrap, and a trial about the capability of the desulfurization reagent on the Ore sintering flue gas was done in the Angang's Circulating fluidized bed absorber tester which can dispose flue gas of 5000 m3/h.
本文以钢铁工业常用物料石灰和生产废料烧结机机头灰组成的混合型脱硫剂,在鞍钢建立的处理风量为5000 m~3/h的循环流化床脱硫装置上进行烧结烟气脱硫试验研究。
3.
A research was carried out on the desulfurization reagent made by lime that is common used in steel corporation and pulverized coal ash produced by steel corporation's fossil power plant, and a trial about the capability of the desulfurization reagent on the Ore sintering flue gas was done in the Angang's Circulating fluidized bed absorber tester.
本文研究了以钢铁企业常用物料活性石灰和自备电厂粉煤灰制备的脱硫剂，在鞍钢循环流化床脱硫试验装置上进行了烧结烟气脱硫性能试验。
5) sintering flue gas
烧结烟气
1.
Study on oxidation of calcium sulfate in the desulfurization ash of semi-dry sintering flue gas
半干法烧结烟气脱硫灰中亚硫酸钙氧化研究
2.
Based on desulphurization of sintering flue gas in China and the conditions at a steel mill,the dense flow absorbers for sintering flue gas desulphurization(DFA-FGD) were designed for two sintering machines of 52 m2 and 68 m2.
讨论了烧结烟气的工况与密相塔脱硫的工艺及特点,通过中试,研究了影响脱硫率的主要因素,确定了优化参数,验证了密相塔搅拌器的作用。
3.
A spray tower was built,and experiment was carried out on desulfurization of sintering flue gas with coking wastewater.
建立逆向气液喷淋反应塔,利用焦化废水进行烧结烟气脱硫试验研究。
6) Sintering Machine Tail
烧结机尾
1.
Makes technical and economic comparison between Ⅰ/Ⅱ dust-removing systems at sintering machine tails, analyses their existing problems,and works out a solution for them.
Ⅱ烧结机尾收尘系统进行了技术经济比较 ,分析了这两种系统自使用以来在的问题 ,并提出了相应的解决办法。
补充资料：带式烧结机烧结
带式烧结机烧结
sintering by sinter strand
一种应用最广的铁矿石烧结方法。带式烧结机是钢铁工业的主要烧结设备，它的产量占世界烧结矿的”%。现代带式烧结机的烧结室的断面示于图1。烧结机是由铺设在钢结构上的封闭轨道和在轨道上连续运动的一系列烧结台车组成。首先将从烧结矿中分出的铺底料(10~Zomm)加在台车上，以保护台车算条和减少废气含灰量。然后再将烧结混合料经布料机加到台车上，并保持规定的高度。随之进行抽风点火烧结，随台车前进，烧结过程由料层表面不断向下进行。至机尾，烧结完成，台车翻转将烧结饼倾卸。空台车沿下部轨道运行至烧结机头部，再加料进行点火烧结，如此循环不断。烧结饼经破碎和筛出热返矿后，送冷却机冷却。从料层中抽出的废气经台车下的风箱至集气总管和除尘装置，由抽风机排向烟囱。dalshi shaojieji shaojie带式烧结机烧结(sintering by sinter strand)}馨爵鬓 森币乒、，一，，，，.、一，r，_， 图1现代抽风带式烧结机烧结室断面图 带式烧结机由烧结台车、密封装置、钢结构框架和3.om、3.sm、4.om及5.om几种。由于台车处于高温传动装置组成。台车是放置烧结料和进行抽风烧结的下工作，因之不仅要求材质能耐高温、而且要求结构合重要部件。它是由铸钢车体、侧板、算条和滚轮组成(见理减少高温变形的影响。在台车和风箱滑道之间有密图2)。按烧结机大小、台车宽度有1.sm、2.om、2.sm、封装置(水管式密封或弹簧式密封)，对减少漏风和节 省电耗有很重要的作用。在机头和机尾的风箱隔板与 ‘卜~一一-一-2500—--，司 创盯一一一下台车之间用重锤连杆式密封。为保证台车在受热膨胀 .对胭奎至斋荞至幕筹拜三三三三三尸气润后仍能平稳运转，在机尾卸矿端设置专门的摆动机架 书阳~一一一即一一邵一二一一一.一-期d{丹一去或可水平移动的尾部星轮。烧结台车借助于机头部分 !毛一一一一，。。州泞的传动装置向前运动，传动装置是由电动机、减速机和 卜卜一一一一-—3216—一一一一月’传动大齿轮所组成。(见彩图插页第2、3页) (杨兆祥蔡法率)纂戳磷~ 图2烧结台车
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条